6 Remington 550-1 Problems: Simple Troubles for Buyers

Learning about Remington 550-1 problems was a great task for me. No doubt, the Remington 550-1 is a classic rifle. It is a popular 22-caliber semi-automatic rifle introduced in the mid-20th century. It is known for its reliability and performance.

Specifically, I learned about feeding, bolts, jamming, firing in, heavy triggers, and extraction problems.

In this article, I’ll share some solutions that have worked for owners to keep this rifle in good working condition.

Let’s Go!

Issues and Fixes at a Glance

6 ProblemsTheir Quick Solution
Feeding ProblemThorough cleaning and adjustments.
Bolt ProblemReplace the bolt or consult Remington Support.
Jamming IssueA thorough cleaning of the chamber and barrel
Firing Pin IssueConduct a thorough check of the sear and spring mechanisms.
Heavy TriggerRemove the bolt from the receiver.
Extraction ProblemClean the chamber with Flitz and a scrub.
Remington 550-1 Problems

Remington 550-1 Problems and Their Practical Solutions

1. Feeding Problem:

Folks! One common issue with the Remington 550-1 is the failure to feed properly in the field. This often happens when trying to fire multiple rounds.

This leads to jams where a shell gets wedged in the chamber.

During my research, the carrier sometimes gets clogged. This causes the floating mechanism to malfunction.

This suggests an underlying problem that must be tackled to ensure reliable performance. Right?

Read More: Remington 770 Problems with Effective Solutions

Solution:

For a fix, it’s essential to focus on the feed ramp. Polishing the ramp and other surfaces can significantly reduce friction, which often causes jams.

  • Start by disassembling the weapon and giving it a deep clean.
  • Pay extra care to the floating chamber.
  • This area can become grimy and lead to shells getting wedged.
  • Maintaining the shape and cleanliness of the feed ramp is crucial.
  • After thorough cleaning and polishing, you should notice a marked performance improvement.
  • If problems persist, contacting Remington Support for additional guidance can be beneficial.

Keeping your firearm well-maintained can do wonders for ensuring it remains happy and reliable.

2. Bolt Problem:

Next, a common problem with the Remington 550-1 is when the bolt gets stuck and won’t budge. It renders the gun unusable.

This issue often arises after the rifle has been bumped or jostled. Result? This causes the firing pin to become bent out of shape.

This makes the pin ineffective and even dangerous to use. In my research, this showstopper can be frustrating because it essentially freezes the bolt in place. Ahhh! This makes it impossible to pull back.

Identifying the culprit behind a frozen bolt is crucial. Right?

Solution:

To tackle this issue, it’s essential to prioritize safety with all firearms. Has the firing pin loosened or slid out of place?

  • First, inspect it for any signs of being bent.
  • While it might be temporarily solved by repositioning the pin, a long-term fix would be to replace it.
  • For a more reliable solution, it’s advisable to consult a certified Remington professional to ensure everything is thoroughly checked and properly fixed.

Trust me, it’s always better to be safe than sorry when dealing with firearm issues.

3. Jamming Issue:

A frustrating issue! Yup, it is jamming.

During a day at the range, the occasional jamming can turn into a significant headache. Do you know? It even occurs with a mix of old and new shells.

Shells may fail to eject properly, leading to problems loading the next cartridge.

This often requires manual intervention to reposition the bolt before firing again.

Such issues can disrupt the flow of shooting and demand constant attention to ensure smooth operation.

Solution:

For a fix, disassemble the weapon to identify the root cause. The owners focused on the bolt carrier and power piston. It ensured they were clean and free of any obstructions.

A thorough cleaning of the chamber and barrel proved essential in resolving the issue.

Owners inspected the magazine tube and receiver for any signs of wear or misalignment. This made the necessary adjustments to ensure smooth operation.

4. Firing Pin Issue:

Next, firing pin malfunctions can be a source of frustration for shooters. It is especially true when they occur mid-shoot. The pin catching or failing to set properly can fail to shoot. So, what happens? It leaves a round stuck in the chamber or the gun cocked without being able to fire.

This issue not only disrupts the smooth loading and operation of the rifle but also brings the entire shooting process to a grinding standstill.

While it’s typically a minor inconvenience, it can sometimes escalate to a showstopper.

Solution:

For a solution, it’s essential to conduct a thorough check of the sear and spring mechanisms. Often, weak or rounded-off components can malfunction.

Begin by cleaning all parts meticulously to remove any dust or debris that may have accumulated over time.

Pay close attention to the bolt and body of the rifle, as any irregularities could be a red flag indicating the need for a new firing pin.

If the issue persists, it might be time to consider a replacement.

In my research, addressing this problem promptly can make the difference between a rifle that functions smoothly.

Don’t hesitate to invest time and effort into this repair. It’s worth every minute spent ensuring your firearm is in top condition.

5. Heavy Trigger:

Facing a heavy trigger? Congrats! You are not alone. It can compromise the comfort and accuracy of shooting sessions.

Shooters may find it challenging to maintain steady aim and precise control over their shots.

Sometimes, a misaligned or worn-out component could be causing the heavy trigger.

This problem is disrupting the shooting experience and requires a quick solution.

Solution:

A heavy trigger requires a fix that involves removing the bolt from the receiver.

The plug retainer must be pushed rearward and then rotated for disassembly. During cleaning, it’s crucial to invest time in a thorough process.

One effective method involves spraying the entire assembly with Simple Green and giving it a brush-down before dunking it in hot water.

After ensuring it’s properly dried with compressed air, a light spray of RemOil should be applied.

Once cleaned and lubricated, attention should be given to the spring, plunger, and other moving parts to ensure smooth operation.

Trust me, this process may feel like grappling at times, but the results are worth the effort.

6. Extraction Problem:

Huff! A real headache. It relates to extraction. When a spent case fails to extract or cycle properly, it can lead to a jammed weapon and a frustrating situation in the field.

This issue often arises due to wear and tear on the rifle over time. This causes the bullet casing to stay lodged in the chamber.

Without proper extraction, shooters may find themselves unable to continue shooting until the problem is resolved.

Solution:

Fear not: I found a permanent fix that significantly improved its cycling.

Clean the chamber with Flitz and a scrub. Pay close attention to problematic areas along the walls. But, what? The primary extraction was still an issue.

To address this, I opted for polishing and floating the extractor, followed by installing a stronger one.

This simple yet effective fix transformed the performance of the owners’ guns, making it cycle like champs.

Now, I couldn’t be happier with its reliability on the range.

My Final Conclusion:

Let’s sum up. In my research with the Remington 550-1, I’ve discovered a few challenges that warrant attention.

This 22-caliber firearm is undeniably functional and robust. However, issues related to feeding and bolt operations have been reported by some users.

These jamming and firing pin dilemmas can be rough for new owners. But, with care and maintenance, they are solvable.

Regular cleaning and light polishing can significantly improve its performance in the field.

Despite these problems, the Remington 550-1 continues to serve its name well in the game.

My Friends Feedback:

Discussions with friends about the Remington 550-1 have highlighted various challenges with this rifle. Common issues include ejection failures and rounds getting stuck in the chamber.

These problems emphasize the importance of thorough cleaning and maintenance for smooth operation.

Some friends have shared stories of inheriting 550-1 rifles from their grandfathers, only to find them virtually unfired due to these persistent issues.

Despite attempts to fix them using cleaning solvents like Hoppes 9 and bronze and nylon brushes, problems persist. This leads to frustration.

Suggestions for solutions have ranged from soaking the action in kerosene to using PVC pipes as improvised cleaning tools.

However, the reliability of these firearms remains a topic of debate among enthusiasts.

Common Questions Asked About Remington 550-1:

What is the difference between the Remington 550 and the 550-1?

The only distinction between models 550 and 550-1 is the number of extractors. Therefore, you should be fine with new parts.

What is the Remington rifle trigger problem?

If you own a Model 700 or any identified model, there’s a chance the firearm may discharge without trigger contact. It’s advised not to use the firearm until it’s inspected and, if needed, repaired by a qualified professional.

Are Remington rifles accurate?

The Model 7615 is a pump-action rifle. Compared to an equivalent bolt-action rifle, it may have slight differences in accuracy, though only experienced marksmen might notice. Overall, the Remington 7615 is considered a good, reliable, and accurate rifle.

What are the rarest Remington rifles?

The rarest variant is chambered in.223 Remington, with only 227 produced, the majority in the final year of production. Before its official inclusion in the line, you could custom-order a Model 600 in 223 from the gun shop.

Is Remington making guns again?

The manufacturing of Remington-branded firearms is gradually resurfacing following the bankruptcy of its former parent company.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *