6 Beretta A400 Xtreme Plus Problems And How To Solve Them

The Beretta A400 Xtreme Plus is renowned for its high performance and reliability, making it a popular choice among hunters and shooting enthusiasts. However, even the best firearms can have their share of problems.

Having spent considerable time with this shotgun, I encountered several issues, including bolt malfunctions, light striker problems, trigger issues, cycling difficulties, double feeding, and jamming. It was shocking!

But there’s no need to worry.

In this article, I’ll examine the Beretta A400 Xtreme Plus problems and offer practical solutions based on my experience.

Problems & Solutions at a Glance

6 ProblemsWith Their Practical Solution
Bolt IssueThorough cleaning and replacing worn parts.
Light Striker IssueClean, lubricate, and maintain the firing pin and spring.
Problems with the TriggerInspect, clean, lubricate internal parts, and check gas settings.
Cycling IssueCheck ammo, maintain lubrication, inspect, and replace worn parts.
Double Feeding ProblemsUse correct shell size and handle loading methodically.
Jamming IssuesClean thoroughly, use high-quality ammo, and ensure snug magazine fit.
Beretta A400 Xtreme Plus Problems

Beretta A400 Xtreme Plus Problems With Their Practical Solution:

1. Bolt Issue:

One common problem is the bolt not locking back properly after cycling, which can be frustrating and impact shooting performance. This issue often stems from an improper fit of the bolt within the receiver, causing it to cycle rounds less smoothly or fail to lock back consistently.

I’ve found that even the tiniest dirt or wear on these components can cause interference, disrupt the cycling mechanism, and cause reliability problems.

By properly maintaining these components, shooters can enhance the reliability of their Beretta A400 Xtreme Plus and minimize interruptions during shooting sessions.


The solution to bolt issues lies in meticulous cleaning and ensuring that all components are dirt-free.

This small but significant difference can extend the wear and tear of critical parts and prevent future cycling problems. When needed, replacing worn parts can restore the bolt to optimal performance.

This approach has proven effective in my shooting history, making handling the Beretta A400 Xtreme Plus much easier.

2. Light Striker Issue:

This problem arises when the firing pin fails to correctly ignite the cartridge’s primer. It can interrupt shooting sessions and undermine confidence in the firearm.

Several factors must be considered when dealing with the light striker issue. I initially suspected that dirty internal mechanisms or inadequate gas pressure might contribute to the problem.

Detailed inspection revealed that settings and the type of ammunition used played a significant role. Even the slightest debris in the barrel or firing pin area could disrupt the ignition process.


The solution to the light striker issue involves a simple approach to maintenance. Regularly clean and lubricate the firing pin and ensure the spring is in good condition.

I’ve found that replacing worn springs and fine-tuning the settings can significantly reduce light strikes. Matching the ammunition to the firearm’s specifications also plays a crucial role.

This attention to detail and use of quality components are the magic that stops the problem from recurring, ensuring reliable operation every time.

3. Problems with the Trigger:

Trigger issues on the Beretta A400 Xtreme Plus can manifest in feed malfunctions, jamming, or difficulty ejecting spent shells. These issues often confuse shooters who want to be more satisfied, especially when expecting smooth operation.

I’ve been determined to figure out what’s wrong in such situations, exploring various solutions to ensure reliable performance in the field.


To resolve the trigger issues, I inspected the firearm for debris that might be causing the problem.

  • I examined the internal parts, including springs and pins, ensuring they were properly cleaned and lubricated. This routine maintenance helped ensure everything was working as intended.
  • I also examined the gas settings and the condition of specific components, such as the extractors, more closely.

Addressing these details and regularly performing maintenance was essential. The trigger issues significantly improved, showcasing the importance of attention to detail.

4. Cycling Issue:

During field testing of the Beretta A400 Xtreme Plus, I encountered cycling problems that initially surprised me. I noticed excessive jams and misfires, which disrupted the shooting performance.

Upon further investigation, I realized that these issues were related to the gas system of the semi-automatic shotgun. The pressure in the gas system caused a short stroke of the piston, affecting the recoil spring assembly.

This tricky problem messed with the shooting performance, making it essential to tackle it head-on to ensure reliable operation in various conditions.


Here’s how I approached and solved this common problem.

  • I started by checking the types of ammunition I was using, ensuring they were suitable shells for the shotgun.
  • Maintenance was vital, involving proper lubrication and a thorough inspection of components.
  • I disassembled the action, looking for any signs of wear or damage, and replaced worn-out parts.
  • I got back on track after reassembling the shotgun with some elbow grease.

These steps resolved the cycling issues, making the gun once again reliable. I was self-satisfied with the outcome, knowing the shotgun was ready for reliable performance in various conditions.

5. Double Feeding Problems:

During testing, my Beretta A400 Xtreme Plus encountered a problem with double feeding. This problem involved simultaneously loading two shells into the chamber, creating a significant hassle during firing and ejecting.

I noticed this issue was particularly concerning when dealing with oversized shells or due to mishandling during loading. After a closer inspection, I realized the problem might have been caused by a broken gun part.

This problem can seriously hinder shooting, leaving you in a frustrating loop. However, there’s an easy way to address this.


When encountering double feeding issues with my Beretta A400 Xtreme Plus, resolving this problem required a careful and methodical approach.

  • Start by ensuring you’re using the correct shell size for your gun.
  • Pay close attention to how you grip the forearm and handle the trigger guard during loading. This methodical approach helps slow down the loading process and prevent jams.
  • If issues persist, consulting a gunsmith experienced with Beretta models can provide expert guidance on proper handling and maintenance to maintain smooth operation.

6. Jamming Issues:

Jamming during shooting sessions is a common frustration with the Beretta A400 Xtreme Plus. This problem occurs when shell casings get stuck while trying to feed into the chamber.

Obstructions such as deformed casings or dirt can often cause these jams, leading to shooting interruptions and affecting the firearm’s overall experience.

Identifying and addressing these issues promptly is crucial to maintaining the gun’s operational efficiency and ensuring a smooth shooting experience.


For a solution? Start by taking the gun apart and thoroughly cleaning each part, paying close attention to springs, pins, and any areas where dirt may be causing blockages.

Ensure that you use high-quality ammo suitable for your gun model and that the magazine fits snugly, preventing jams from occurring.

This attention to detail and regular maintenance can banish jamming issues, allowing you to enjoy shooting confidently.

Read More: Smith and Wesson Model 60 Pro Problems with Suitable Fixes.

My Final Conclusion:

In my experience with the Beretta A400 Xtreme Plus, extensive field testing has brought to light various challenges.

From occasional bolt issues to frustrating jamming problems, the essential maintenance is a testament to the attention to detail needed to keep this gun in top shape.

Recognizing and promptly rectifying any issues encountered is crucial to ensuring the perfect functioning of this high-quality firearm. Managing its weaknesses becomes an art and a science, particularly for those who demand the best in their shooting equipment.

The Beretta A400 Xtreme Plus remains a severe choice for demanding shooters who value reliability and precision.

My Friends Feedback:

I have discussed this with my friends, who are avid gun enthusiasts, and their experiences with the Beretta A400 Xtreme Plus have been quite varied.

One friend mentioned how his shotgun, which was only a few months old, encountered issues with shells not feeding properly into the chamber, often getting hung up at an awkward angle and causing the front shell to deform.

This led to problems with ejection after firing, especially with heavier loads like 11/8oz. Despite these issues, he highlighted positive ejection experiences when using lighter 1oz loads.

Another friend shared his satisfaction with the Beretta A400 Xtreme Plus during hunting expeditions. He praised its reliability in firing rounds consistently without jamming, even under challenging conditions such as hunting waterfowl and upland birds. His gun was meticulously cleaned and lubricated, ensuring smooth cycling of various loads from medium to heavy brass.

A third friend, a seasoned gunsmith, discussed common cycling issues seen in the A400 series. He highlighted the importance of regular maintenance, including cleaning and oiling critical parts like the piston assembly.

According to him, some problems could be traced back to worn parts or improper assembly, which could affect the gun’s performance. He also mentioned recent issues related to shipping delays affecting parts availability, underscoring the challenges faced in obtaining timely repairs.

Reflecting on these insights, it’s clear that while the Beretta A400 Xtreme Plus is loved for its robustness and reliability in various shooting scenarios, addressing maintenance and occasional part issues is crucial to maximizing its performance and longevity.

Beretta A400 Xtreme Plus Problems

Common Questions Asked About Beretta A400 Xtreme Plus Problems:

Is the Beretta A400 Xtreme Plus worth the money?

The A400 Xtreme Plus proves its value for those who adhere to the ‘buy once, cry once’ philosophy, believing that investing in top quality upfront saves money over time. Starting at $1,899, it may not be considered a budget option, but it delivers exceptional value with its low-recoil and dependable performance.

What is the difference between Beretta A400 Xtreme and Xtreme Plus?

The A400 Xtreme Plus closely resembles last year’s A400 Xtreme, which also included the Kick-Off Mega feature. However, this updated model incorporates several enhancements: a larger ejection port, an oversized bolt handle, and an upgraded bolt-release latch.

What choke tube does the Beretta A400 Xtreme Plus use?

The choke tube thread has a major diameter of 20 mm (0.787 inches). Currently, the Optima-Choke HP system is primarily employed in models such as the SV-10 Perennia and Prevail series, DT11 and Ultraleggero over-and-under shotguns, as well as the UGB 25 Gold Sporting, A400 Xplor Action, and A400 Xtreme Plus semi-automatic shotguns.

When did the Beretta A400 Xtreme Plus come out?

The Beretta A400 Xtreme Plus was introduced on May 5, 2018, at the NRA Annual Meeting in Dallas. Manufactured in Italy, it is touted as the pinnacle of reliability, designed to excel in all environmental conditions encountered during waterfowl hunting.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *