Solving Top 4 Kel-Tec P11 Problems Made Easy

I’ve spent considerable time testing various models, and the Kel-Tec P11 frequently comes up in discussions on gun forums.

As someone testing this firearm, I understand the frustration when faced with Kel-Tec P11 Problems such as spring problems, slide lock issues, feeding malfunctions, and extraction issues.

This article will dive into the common problems associated with the Kel-Tec P11.

But rather than just listing the gripes, my goal is to provide practical solutions to tackle these issues head-on.

By investigating the issues and applying practical solutions, shooters can enjoy a more reliable, satisfying, and safer experience with this firearm.

Issues and Fixes at a Glance

4 Problems With Their Quick Solution
Spring ProblemInspect and replace worn firearm springs for consistency.
Slide Lock IssueInspect, replace spring, test slide lock mechanism function.
Feeding MalfunctionInspect, polish or replace, test for improved feeding.
Extraction IssueInspect extractor and ejector, replace if necessary, test function.
Kel-Tec P11 Problems
Kel-Tec P11 Problems

Kel-Tec P11 Problems With Their Practical Solution:

1. Spring Problem:

The infamous spring issue can be a frustrating experience for many shooters. This finicky component, responsible for slide recoil and cycling, can affect the firearm’s reliability and shooting accuracy.

Technically speaking, the spring in the Kel-Tec P11 can be weak or inconsistent, leading to malfunctioning during operation.

These inconsistencies in cycling can result in feeding and extraction problems, ultimately affecting the gun’s overall performance.


For a solution, ensuring the firearm is unloaded before tinkering with it is essential.

Start by disassembling the gun to get a closer look-over of the spring. Check for any worn or stretched-out areas that may need replacing. If the spring appears to be malfunctioning, consider a replacement.

From my experience, replacing a weak or inconsistent spring can work like a charm.

I’ve swapped out springs in my Kel-Tec P11 to ensure consistent recoil and cycling. It’s essential to use manufacturer-approved fixes to avoid any potential malfunctions.

However, I’ve recently encountered some unexpected issues with my FN 503 Problems, which prompted me to revisit the maintenance procedures for all my firearms.

2. Slide Lock Issue:

I’ve encountered the slide lock issue multiple times during field tests with the Kel-Tec P11. It can be a real headache, especially when you’re in a high-pressure situation and need your firearm to perform reliably.

In my experience, a worn-down or engaging slide lock can significantly affect the reliability of the Kel-Tec P11.

It’s frustrating to rely on a firearm that fails to lock back consistently after the last round.


No, let’s fix this. Safety is paramount to resolving the slide lock issue.

Ensure the firearm is completely unloaded before taking it apart to inspect the slide lock mechanism closely. Often, the spring is the culprit behind the problem, so replacing it with a new one may be a straightforward solution.

After replacing the spring, testing the firearm at the range is essential. And voila, if it starts behaving correctly, locking back after the last round or when the empty mag is in place, the issue may be resolved.

Ensuring the slide lock stays in place correctly is crucial for the safety and reliability of the Kel-Tec P11. However, it’s important to address potential issues that users may encounter, such as Kel-Tec P32 Problems.

3. Feeding Malfunction:

Tackle the feeding malfunction can throw a wrench in your shooting experience. Malfunctions during this time can be frustrating, especially when a round fails to feed correctly into the chamber.

Trust me, this issue isn’t always the gun’s fault.

Sometimes, the ammo itself or even the magazine feed ramp is causing the jam. Ensuring everything is aligned correctly is technical but necessary.


To fix the feeding malfunction, Safety comes first.

  • Always ensure the gun is unloaded before proceeding.
  • Examine the magazine and feed ramp closely for any dings or damages.
  • Polishing or even replacing a damaged feed ramp can make a significant difference.
  • Using fine-grit sandpaper, carefully polish the feed ramp to ensure smooth changes in the rounds’ trajectory.
  • Paying attention to these minor details can significantly improve the firearm’s reliability.

After making these fixes, it’s essential to test the gun at the range to ensure the issues are resolved. A consistent and reliable firearm like the Kel-Tec CMR-30 Problems can make a world of difference in your shooting experience.

4. Extraction Issue:

Let’s discuss the extraction issues. I’ve encountered instances where spent casings failed to eject properly, throwing off my rhythm at the range.

This issue is often caused by the extractor or ejector failing to provide enough force to kick out the casing. It can be frustrating, as it disrupts the firearm’s smooth operation.

Technically, the extractor’s grip on the casing is crucial for proper extraction. When this fails, the spent casing may not eject as expected, causing reliability issues.


Now, it’s time for the solution.

Ensure the firearm is unloaded and the slide is open for inspection. Then, inspect the extractor and ejector to see if they are dirty, damaged, or worn.

From my personal experience, I ordered a new extractor and replaced it to fix the problem. I also cleaned the ejector for good measure.

On my next trip to the range, I confirmed that the issue was resolved. The spent casings flew out smoothly, and the firearm cycled without any hitches.

My Final Conclusion:

To be completely honest,

The Kel-Tec P11 is far from being a flawless masterpiece. My hands-on experience with this firearm has shown that it’s not without issues. It can be quite a hassle, from spring problems to slide lock glitches, feeding malfunctions, and extraction issues.

However, there is a silver lining. While these problems may be considered deal-breakers for some, the Kel-Tec P11 can still be a reliable piece of hardware with the proper attention and care.

Replacing worn-out parts like the spring or polishing the feed ramp can lead to manageable fixes that significantly impact the firearm’s performance.

My Friends Feedback:

My friend recently purchased a Kel Tec P11 from a local gun store. He mentioned that it slipped and went off unexpectedly while pulling back the slide to load a round. He’s not alone in this experience, as he’s seen similar complaints online.

Despite being a decade-old model that’s been regularly carried, he expected to avoid encountering a new issue like this. The incident he faced, known as a slam fire, is concerning, especially considering it was caused by a malfunctioning firing pin block or spring.

Upon further research, my friend discovered that issues with the P11 are common. Many CC gun enthusiasts have raised concerns about its reliability. Reviews often mention problems such as jams and failures to extract, particularly with certain types of ammunition like the 9mm Luger Remington UMC.

Some users have even resorted to simple mods to improve their performance. The consensus seems to be that while the P11 is marketed as a dependable choice for everyday carry, function problems can mar its life.

My friend shared his own experience with the Kel-Tec P-11. He recounted an incident where, after loading a round, the gun fired unexpectedly while still in his holster.

This happened despite him being careful and carrying the gun with the trigger covered. He contacted Kel-Tec for clarification, but their response left much to be desired.

Another friend has owned the P-11 for three years and has also faced issues. He reported feeding issues and trouble with quality control despite the firearm being covered by the company’s lifetime warranty.

While both friends are grateful for the occasional reliability, they acknowledge that owning a Kel-Tec has its fair share of hiccups.

Kel-Tec P11 Problems
Kel-Tec P11 Problems

Common Questions Asked About Kel-Tec P11:

Does Kel-Tec P11 have safety?

The handgun’s standard magazine contained 10 rounds. It was relatively light, with an unloaded weight of 17.1 oz (480 g). The P-11 did not have an external manual safety; instead, it relied on a long and heavy double-action-only trigger pull, requiring 9 pounds of pressure, to prevent accidental discharge.

When did the Kel-Tec P11 come out?

In 1995, Kel-Tec introduced the P-11, a polymer-framed, semi-automatic pistol chambered for the 9mm cartridge. It features a double-action-only mechanism.

Where is the serial number on a Kel-Tec P11?

The serial number on pistols like the Kel-tec is located on the back of the frame, below the striker.

What happened to the Kel-Tec P11?

KelTec has ceased production of the P11 pistol, recognized as the pioneering 9mm polymer pistol for concealed carry. Although no longer in production, the company will continue to support P11 owners by honoring its warranty and providing full-coverage servicing while replacement parts are available.

What is the weight of the trigger pull on a Kel-Tec P11?

The Kel-Tec P11 features a lengthy, weighty 9-pound trigger pull.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *