Resolve 10 Remington 572 Problems with These Proven Tips!

As a seasoned firearms enthusiast, I’ve faced my share of Remington 572 Problems. For instance, I’ve encountered issues with the bolt locking up, the trigger pull being too stubborn, and the bolt return being balky. 

For instance, I’ve encountered issues with the bolt locking up, the trigger pull being too stubborn, and the bolt return being balky. 

This classic pump-action rifle occasionally stumbles despite its allure, presenting common issues like jamming and feeding challenges. 

Imagine the frustration at the range when the bolt locks up, disrupting the smooth flow of shooting. However, every setback holds a solution. Troubleshooting reveals underlying causes: a stubborn trigger pull or a balky bolt return. 

These hiccups demand attention but rest assured, the Remington 572 can be restored to its charming self with careful troubleshooting and maintenance. 

Addressing these issues keeps the rifle working like a charm, both on the range and in the field, whether clearing obstructions or ensuring a seamless battery return.

Problems & Solution at a Glance

10 ProblemsQuick Solutions
Feeding ProblemsInspect, clean, and upgrade spring; consult gunsmith if needed.
Failure To EjectClean the chamber, inspect parts, and check recoil spring strength.
Hammer ProblemHammer misalignment leads to Remington 572 malfunctions.
Jamming ProblemsUse quality ammo, maintain a firearm, and consult a gunsmith if needed.
Trigger Pull ProblemsMaintain, adjust, and seek professional guidance for improvements.
Gun Fails to Lock ProblemInspect, clean, lubricate, and replace damaged parts.
Open Sight ProblemCheck alignment, tighten, replace damaged/bent sights, and practice regular
Bolt Freeze-Up IssueClean, lubricate, and check for misalignment.
Recoil Spring ProblemInspect, oil, replace if damaged, and reassemble for a fix.
Not Returning To BatteryInvestigate chamber residue and verify caliber for solution.
Remington 572 Problems

Remington 572 Problems with Their Quick Solutions:

1. Feeding Problems:

One of the standard issues that many firearms face is the feeding problem. From misfeeds in the field to disruptions at the range, these issues can quickly dampen the shooting experience. 

Often, the culprit lies in a dirty or fouled chamber, where grime and debris hinder smooth feeding.

A weak magazine spring or low-quality ammunition can also compound the Problem of misfires and feeding failures.

Solution:

A solution to feeding problems begins with a thorough inspection. Start by removing the magazine and clearing the chamber of any obstructions using a cleaning rod and brush. 

Once thoroughly cleaned, wipe the components with a cloth to ensure they’re debris-free. 

If the issue persists, it might indicate a weak spring. Consider replacing it with a stronger one to feed rounds reliably.

For more intricate issues like a damaged or worn feed ramp, consulting with an experienced gunsmith might be necessary.

Additionally, it is crucial to evaluate the quality of ammunition used. Always be vigilant for signs of damage or defects and opt for higher-quality brands when possible.

2. Failure To Eject:

Another culprit behind the Failure to eject Problem is dirty or fouled chambers. Over time, residue from expended rounds can build up in the chamber, causing issues with the ejection process. 

When the chamber is unclear, the spent casing may not be adequately ejected, leading to malfunctions during shooting.

By understanding the causes and implementing the fixes, shooters can enjoy a smoother shooting experience with their firearms.

Solution:

So, what’s the solution? 

Firstly, ensure meticulous cleaning of your firearm after each use. A dirty chamber can impede the ejection process, causing spent cartridges to hold on for dear life and making them reluctant to depart their temporary abode.

Secondly, inspect the extractor and ejector for any signs of damage or wear. These components play a pivotal role in the ejection process.

Lastly, consider the possibility of a weak recoil spring. A weak spring may not provide sufficient force to expel the spent casing, leading to malfunctioning correctly.

If these measures fail to rectify the issue, it might be time to seek the expertise of a seasoned gunsmith. They can precisely diagnose the Problem and recommend the necessary repair or replacement.

3. Hammer Problem:

A malfunctioning hammer can lead to dangerous situations, such as misfires or accidental discharges. Addressing this issue promptly is essential to ensuring the safety of both the shooter and bystanders. 

If the firing pin is misaligned or the spring is broken, the ammunition may not ignite properly, resulting in a frustrating experience for the user.

In my experience, encountering a hammer problem while using the Remington 572 can be alarming and inconvenient.

It’s crucial for Remington 572 owners to be aware of potential hammer malfunctions and to address them promptly to prevent any accidents or injuries. 

Solution:

One significant concern that often arises with the Remington 572 is related to its hammer mechanism. When this crucial component becomes misaligned or damaged, it can lead to frustrating malfunctions during operation. Addressing this Problem requires a systematic approach.

  • Disassemble the firearm carefully to gain access to the inner workings necessary for troubleshooting.
  • Inspect the hammer closely for any signs of wear or tear.
  • If damage is evident, replace the hammer entirely or realign it properly if severe misalignment is detected.
  • File down any burrs or repair minor damage to the hammer.
  • Ensure the firing pin channel is clear of any obstructions or debris.
  • Check for broken or defective springs and install new springs if necessary.
  • Always use high-quality and suitable ammunition.
  • Double-check all parts during reassembling to ensure proper assembly.

By following these steps, you can address hammer issues promptly and maintain the reliability and performance of your Remington 572.

4. Jamming Problems:

Jamming can occur for various reasons, presenting a significant inconvenience for shooters. One common culprit of jamming is poor ammunition quality. Low-quality or defective rounds may fail to feed or eject properly, leading to malfunctions. 

Additionally, issues with the magazine, such as being bent, worn, or damaged, can hinder the smooth feeding of rounds into the gun.

Furthermore, dirt, dust, and debris can clog the mechanism, causing jamming during operation. 

By addressing these potential causes of jamming, Remington 572 owners can enjoy a more reliable shooting experience.

Solution:

To fix and prevent jamming:

  • Investing in high-quality ammunition and regularly inspecting and maintaining their firearms. Cheap or defective rounds can cause issues, so using reliable ammunition is crucial. 
  • Regularly checking the magazine for wear and damage and cleaning and lubricating the firearm’s interior can prevent dirt and debris buildup. 
  • Inspecting the chamber is essential; if problems persist, consulting a qualified gunsmith is necessary.

These steps ensure a smoother shooting experience and reduce the risk of jamming in the future.

Read More: Top 5 Remington 522 Viper Problems: Quick Fix Guide

5. Trigger Pull Problems:

Trigger pull issues are common among firearm enthusiasts. The force needed to discharge the rifle may vary, leading to inconsistency and frustration.

A weak or broken spring within the trigger assembly is often the root cause of trigger pull issues. Over time, dirt and debris can accumulate, causing the mechanism to malfunction. 

Improper trigger adjustment can also lead to problems, such as misaligned components within the assembly.

Solution:

To fix trigger pull issues, prioritize regular cleaning and maintenance to prevent dirt and debris buildup.

Follow the firearm manual for proper adjustment guidance. If you suspect misaligned components, consider professional help to ensure safety and effectiveness.

Understanding the mechanics and seeking professional guidance can optimize your shooting experience.

6. Gun Fails to Lock Problem:

Now, move on to the next issue, when the gun fails to lock after firing. Understanding the causes behind this malfunction is crucial for effective troubleshooting.

Prolonged usage or mishandling can wear or damage the locking mechanism’s components. Dirty or fouled actions may also prevent the gun from functioning correctly. 

Additionally, worn-out recoil springs may fail to generate the force to push the locking mechanism into place. Damaged extractors or ejectors can also contribute to this Problem.

Solution:

When your gun fails to lock, follow these simple steps to address the issue effectively.

  • Ensure the chamber is empty and inspect the locking mechanism for any damage or debris.
  • Clean and lubricate the components thoroughly, and if necessary, replace damaged parts as the manufacturer recommends.
  • Additionally, proper ammunition should be used to prevent future malfunctions. 

Based on personal experience, these practices can keep your Remington 572 operating smoothly.

7. Open Sight Problem:

Another common problem with guns is open sights. Misalignment of the front and rear sights is a primary cause of this Problem.

Open sights are essential in type, covered or exposed, allowing for quick target acquisition.

However, if they are correctly aligned in a straight line, the accuracy of the aim may improve. Loose or damaged sights can shift during use, affecting the accuracy of shots.

Solution:

For a solution, there are steps you can take to address it and ensure accurate shooting.

First, ensure the sights are correctly aligned and securely tightened. Consider replacing any suspect, damaged, or bent sights. 

Adjust the height of the sights to correct your grip on the rifle and maintain a clear picture of the target.

Regular practice of shooting techniques is essential to minimize shooter error. Adjust the sights as needed for distance and wind conditions to maintain accuracy.

8. Bolt Freeze-Up Issue:

This technical difficulty is common and often occurs when the bolt becomes stuck, making it difficult or even impossible to chamber a round.

Lack of lubrication or dirty, corroded parts primarily causes bolt freeze-up. Regular maintenance is crucial to prevent such issues. 

Additionally, environmental factors such as extreme weather conditions can exacerbate the Problem.

Solution:

To fix bolt freeze-up issues, follow these steps for effective resolution.

  • Disassemble the rifle to access the bolt assembly.
  • Inspect all parts for dirt, corrosion, or wear, paying particular attention to the bolt carrier and receiver.
  • Clean all parts thoroughly using a suitable cleaning solvent, lubricant, brush, and cloth to remove debris.
  • Apply a thin lubricant layer to all moving parts to ensure smooth operation.
  • Check for proper fit and alignment of the bolt assembly. Replace any misaligned or damaged parts.
  • Reassemble the rifle and test-fire it to ensure that it operates smoothly.

Rest assured, diligently Following these steps can effectively address bolt freeze-up issues and ensure the reliable performance of the Remington 572 rifle. While the 572 is generally well-regarded for its functionality.

Some shooters encountered difficulties with the Remington 788 Problems model. If you’re experiencing persistent issues, it may be worth seeking advice from experienced gunsmiths or contacting Remington for support.

9. Recoil Spring Problem:

Recoil spring issues are a common concern among gun owners as this component is essential for absorbing shock and ensuring the firearm functions correctly. 

When the recoil spring experiences wear and tear, lacks lubrication, or is incorrectly installed, it can lead to various problems that affect the firearm’s performance.

Solution:

Fixing recoil spring issues is relatively simple and can be done in a few steps. First, inspect the spring for any signs of damage or wear. Ensure it is in good condition before proceeding. 

Lubricate it using a firearm-specific lubricant, following the manufacturer’s instructions carefully. If the spring is damaged, it should be replaced.

To replace the recoil spring, start by removing the stock of the Remington 572 to access the recoil assembly. 

Carefully remove the old spring and install the new one. Reassemble the firearm and test it to ensure proper functionality. 

Following these steps can help resolve recoil spring issues and ensure the smooth operation of the rifle.

10. Not Returning to Battery:

Not talking about the issues with the rifle not returning to the battery can disrupt shooting sessions. In my experience, this Problem often manifests as the bolt failing to fully close after cycling. 

This can result in rounds not feeding or ejecting correctly, causing a frustrating snag during firing. When the bolt fails to return to the battery, it’s a big no-no for ensuring the rifle functions as it should.

The champ of a firearm, like the Remington 572, should cycle smoothly without making a fuss. 

However, when the bolt gets stuck, and the shooter finds themselves fumbling to load the rifle, it can significantly affect the shooting experience.

Solution:

A meticulous approach is vital to finding a solution. Start by inspecting the chamber closely for any nasty residue, such as lead or carbon buildup, which can often be the troublemaker. 

Utilize appropriate cleaning tools to ensure a thorough removal of any such deposits. After cleaning, observe how the bolt behaves; it should improve performance. 

Also, double-check the barrel’s caliber stamp to confirm you are using the proper ammunition. 

Surprisingly, using the wrong caliber can lead to issues with the action returning to the battery. By addressing these aspects meticulously, you can resolve the Problem effectively.

My Final Conclusion:

I’ve tested the Remington 572 and reached a verdict. This gun is a remarkable piece of craftsmanship with top-notch design elements.

 While it’s not without issues, like a stiff trigger pull, Failure to return to battery, and occasional feed jams, the upside is that these hiccups are fixable. 

From swapping out springs to giving it a deep clean, most problems can be resolved with some tinkering. However, a trip to a trusted gunsmith can work wonders if you encounter persistent issues.

Once correctly tuned, the Remington 572 can run smoothly and reliably, becoming an invaluable companion on your shooting escapades.

My Friends Feedback:

When my friend encountered issues with his Remington 572 pump action, it wasn’t just a single problem but a cascade of issues that seemed to jam the rifle’s pump mechanism. It would often bind up, making it difficult to slide forward smoothly. 

Upon taking apart the rifle, we could hear something moving inside the action, which didn’t seem normal. As we disassembled it, pieces seemed to fly everywhere, indicating a deep-seated cleanliness issue within the mechanism. 

In response, my friend consulted a skilled smith to work on the rifle, mainly focusing on the lock tube and follower to ensure proper feeding.

Another friend shared a similar experience when he took apart his Remington 572. He discovered a broken metal piece flopping around but couldn’t tell where it came from. 

After some investigation, he found that a little loop connected to the disconnector link spring was missing. He had to pay to ship the gun parts for repair to address this breakdown.

Despite this issue, he expressed gratitude for everyone’s help and appreciation for the community’s willingness to assist fellow gun enthusiasts.

Lastly, a friend encountered problems with round chambering and feeding on his Remington 572. Upon disassembly, he noticed rough factory-machined edges and wear on the action. 

Following the manual’s guidance, he cleaned the trigger assembly and other parts. However, despite his efforts, the issue persisted. 

He sought further advice and consulted with a gunsmith named John, who was knowledgeable about 22s. John suggested a general cleaning approach, emphasizing the importance of addressing accumulated gunk. 

Following John’s advice, my friend removed the stock and forearm, initiating an action cleaning process using Break Free Remington Action Cleaner, an automotive brake cleaner in an aerosol can. He was amazed at the gunk that had accumulated over the years. 

After blowing out the debris with compressed air and lightly lubricating the parts, he checked the carrier tube and spring for excess wear or play. 

Discovering wear on the pivot surface, he realized the necessity of replacing parts as indicated in the trigger group’s drawing.

Remington 572 Problems
Remington 572 Problems

Common Questions Asked About Remington 572 Problems

Is the Remington 572 a good rifle?

 This is an excellent outfit for the rimfire shooter looking for something unique. While quality comes at a price, and this rifle isn’t cheap—retailing at just under $1000—it promises to deliver outstanding performance for many years if properly maintained.

Does Remington still make the 572?

The 572 model was discontinued in 2020 after the parent company went bankrupt.

Are Remington rifles accurate?

As far as a model 7615 Remington 7615 is concerned, it is a pump-action rifle that might need to improve its accuracy compared to a similar bolt-action rifle. However, an experienced marksman would be unable to discern any noticeable difference. The Remington 7615 is a reliable, accurate, and dependable rifle.

When was the Remington 572 made?

The Remington 572, introduced in 1954 as the M572A, succeeded the Remington Model 121. Designed to resemble the Remington 870 shotgun, this 5-pound rifle features a “hammerless” style, with the hammer enclosed within the action and side ejection.

What is the length of pull on a Remington 572?

Overall length: 42 inches. Weight (empty): 5.75 pounds. Length of pull: 13.63 inches.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *