6 Troubling Remington 597 Problems Revealed: Fix Now!

The Remington 597 is a well-crafted firearm that excites many enthusiasts, but like any weapon, it has encountered issues in the field.

From cycling hitches to failure-to-fire situations, these are not just problems, they are opportunities for us to engage in a meaningful discussion.

In my experience with the Remington 597, I’ve seen feeding issues, appearance concerns, and trigger or bolt malfunctions go down. 

Yet, with a steadfast trust in the firearm and a more comprehensive understanding of its intricate workings, these issues can be effectively addressed, unveiling the true potential and reliability of this Remington 597 rifle.

Now, let’s dive into the Remington 597 Problems and how I tackled them head-on. 

This troubleshooting guide will provide you with practical solutions to common issues, helping you to maintain and appreciate the reliability of your Remington 597.

Problems & Solutions at a Glance

6 ProblemsWith Their Quick Solution
Problem with the CyclingCheck guide rods, replace recoil springs.
Failure To FireSwitch to CCI mini-mag ammo, adjust mainspring tension.
Ejection FailureTry 3rd Gen mags, inspect extractor, clean bolt.
Feeding IssuesSwitch to high-velocity ammo and replace magazine spring.
Bolt IssueReplace worn guide rods and recoil springs.
Trigger ProblemCenter pin reset lever, apply JB Weld for quick fire.
Remington 597 Problems
Remington 597 Problems

Remington 597 Problems With Their Practical Solution:

1. Problem with the Cycling:

Let’s dive into the cycling problem. When I first encountered cycling problems, it was frustrating. 

At the range, after every trigger pull, instead of a smooth bam, I experienced sticky movements and cases getting stuck in the back position, forcing me to manually move them forward.

Solution:

To solve this problem, I delved deeper, inspecting the bolt and guide rods. 

I found that stress could bend the guide rods, affecting cycling. If recoil springs are causing friction, they may need to be swapped out.

Through investigating and problem-solving, I learned that ensuring all components are cycling correctly is crucial for smooth operation. 

Sometimes, the solution may be as simple as cleaning and lubricating dragging parts. The right approach can solve even the most frustrating cycling issues.

2. Failure To Fire:

Upon investigating this issue, I found that it’s not just a matter of chance. Sometimes, it’s a matter of the trigger not engaging correctly or the firing pin not striking the primer with enough force. 

Playing this game of chance while shooting can be disheartening, especially if you repeatedly reload and encounter the same problem.

Solution:

When I noticed failure-to-fire problems, I began tweaking various components to find a solution. 

  • One significant difference was switching to CCI mini-mag ammunition, which proved to be more reliable for my specific use case.
  • Next, I adjusted the mainspring tension, finding the right balance by changing to the factory setting.
  • Additionally, ensuring the guide rail screws were neither too loose nor too tight played a crucial role in resolving the issue.
  • Lowering the rails slightly and ensuring they were adequately touched against the bolt made a difference.

These adjustments and tweaks, while seemingly minor, made a remarkable difference in eliminating the annoying failure-to-fire issue.

3. Ejection Failure:

The notorious failure-to-eject problem can genuinely ruin your day at the range. It’s frustrating when, after every few shots, you find yourself dealing with jams and rounds failing to eject properly. 

This issue is consistent across the board, regardless of the type of ammo or brands used.

Solution:

One thing that significantly improved handling the failure-to-eject problem was using 3rd Gen mags, which alleviated the issue to a limited extent. 

Upon closer inspection, I began to suspect that the extractor might be the culprit. I checked the number of rounds it had been through and gave it some TLC. 

Additionally, I thoroughly cleaned the bolt face and barrel cutout to ensure no obstructions were causing the issue.

Replacing worn parts also made a noticeable difference in the rifle’s performance. Making these adjustments and giving the gun extra care improved the ejection failure problem.

4. Feeding Issues:

Feeding problems can be a prominent and notorious issue for owners. When loaded rounds in the magazine fail to sit correctly, with the top bullet sitting too low, it can be incredibly frustrating. 

The rifle seems to taunt you as if it’s daring you to manage a second round to feed into the chamber after the first shot.

Solution:

The root of feeding issues often lies in the factory magazines supplied with the rifle. These magazines can be finicky, leading to jams and unreliable feeding. 

Switching to CCI high-velocity ammo made a difference in resolving this problem.

Additionally, I replaced the magazine spring to ensure smooth feeding. If you’re hesitant about making these changes, feel free to return to your dealer and swap out any potentially faulty parts.

Making these adjustments significantly improved the reliability of my Remington 597. Read more about potential issues with other rifles like the Smith and Wesson M&P 15-22 problems.

5. Bolt Issue:

The bolt issue is a hassle often faced by rifle owners. During shooting, the last thing you want is for the bolt to become sticky and refuse to budge. 

The bolt’s smooth functioning is essential for the rifle’s smooth operation. Proper maintenance and lubrication of the bolt mechanism are crucial to avoid this problem.

Solution:

A visual inspection of the guide rods often reveals whether they are worn and contributing to the problem. 

Similarly, the recoil springs can cause the bolt to stick. After a thorough investigation, replacing these parts can significantly improve the rifle’s action.

In my experience, closely examining the bolt’s grooves highlighted areas where cleaning was necessary. Using a specific cleaner to remove any gunk causing stickiness proved effective in resolving the issue. 

Regular maintenance and attention to these details can keep the bolt operating smoothly and prevent future problems.

6. Trigger Problem:

The trigger problem can be a sneaky issue in the field, particularly during shooting sessions. It may involve difficulty locking onto rounds or issues with the trigger assembly. 

A vertical piece at the back of the trigger can sometimes lead to auto-reload problems, making the shooting experience inconvenient and frustrating.

Solution:

When solving the trigger problem, the first thought is often to check the pin reset lever and ensure it’s centered. 

Applying JB Weld to the side of the bolt facing the trigger can be a quick fix to enable speedier fire. 

However, it’s essential to be mindful when applying any fixes, especially if you need to be more comfortable with intricate rifle mechanisms. 

Consulting with experts is always recommended to make sure everything runs smoothly. 

Read more about 6 Smith and Wesson M&P 15 Sport 2 problems: Quick Fix!

My Final Conclusion:

After spending considerable time testing the Remington 597 in the field, it’s essential to appreciate its strengths and weaknesses. To its credit, the rifle is quite sturdy and offers decent accuracy, making it a solid choice in the .22LR semi-automatic market.

However, like any product, it has its downsides. I encountered issues like cycling hitches, failure-to-fire, ejection, and feeding problems.

The good news is that many of these issues can be fixed with time and tweaking. Solutions exist, whether it’s switching parts or adjusting settings.

In sum, although the Remington 597 has its drawbacks, once these are dealt with, it can become a dependable companion for those willing to invest the necessary effort.

My Friends Feedback:

One of my friends, a seasoned sporting clay shotgunner, recently picked up a Remington 597. However, he soon encountered several problems. Despite thoroughly cleaning the rifle, issues arose when he hit the range and loaded the clips.

The stock, supposedly designed to hold up during firing, proved random at best. Sometimes, the performance was perfect, while other times, it was terrible, leading to frequent reloads. He described it as an OK experience, where hitting the mark was a hit or miss. 

The most frustrating aspect was the failure to fire. Pulling the trigger, he heard a click, but the shot didn’t always fire. Pulling back the operating handle, he found the bullet unfired. This happened dozens of times, leaving him wanting ideas. 

He tightened the guide rail screws with a torque wrench post-cleaning, but the issues persisted. It left him questioning if the clip was loaded correctly or if there was a need for a warranty run with Remington.

Another friend shared similar troubles with ammo reliability and firing. Despite trying different brands, from Federal to CCI, the firing mechanism often needed to be revised. Rounds would fail to feed or eject, requiring manual intervention to chamber correctly. 

This scenario was consistent across various types of ammunition. Troubleshooting involved checking for struck pins or diagnosing extraction issues, but the problems persisted. 

There were no concrete solutions, even after switching magazines or examining the chamber. The experience was like watching Slinkies tumble downstairs, a mix of frustration and resignation.

A visit to the main forum revealed many bad reviews and issues shared by people. While some attributed problems to plastic magazines, others believed metal ones were equally problematic. The majority faced semi-auto feeding issues, which were both familiar and troublesome. 

Despite these deterrents, there were also tempting tales from earlier owners whose issues were cured with newer models. Comparing notes across forums showed that feeding problems were common among Remington’s 597 users.

The discussion expanded to misfires and potential theories behind them. Some attributed it to damaged chambers or dry firing, while others suggested relieving spring pressure or checking for carbon buildup.

Regardless, many faced similar failures to eject or stovepiping. Disassembly and minor adjustments fixed some issues, but others persisted. 

Ultimately, the Remington 597 rifle demanded attention to detail and luck to function smoothly.

Remington 597 Problems
Remington 597 Problems

Common Questions Asked About Remington 597 Problems:

Why did Remington discontinue the 597?

In August 2009, Remington warned customers to stop using the Model 597 in .17 HMR due to safety concerns. The company requested that all Model 597 rifles be chambered in .17 HMR and any Remington-brand firearms.

How accurate is the Remington 597?

The stock provided a comfortable fit, the magazine was easily accessible for reloading, and the gun demonstrated remarkable accuracy. In fact, following our testing protocol of five shots at 50 yards, one of the best groups was achieved using CCI’s standard velocity 40-grain ammunition, measuring just 0.38 inches.

What is the Remington 597 recall lawsuit?

Be cautious about the ammunition you use. A federal class action lawsuit alleges that using Cascade Cartridge/CCI Ammunition’s rounds can cause the rifle to explode and that Remington’s recall notice was insufficient.

What year was my Remington made?

Remington Year of Manufacture Codes can be located on the barrel of your Remington rifle [or shotgun], positioned on the left side, just ahead of the receiver. The first letter in the code represents the month of manufacture, followed by one or two letters indicating the year of manufacture.

What is the stock for the Remington model 597?

The Remington 597 comes standard with a synthetic stock, and some models are factory-equipped with a scope. Known for its accuracy, lightweight design, and reliability, it’s quickly gaining popularity as one of America’s favorite semi-automatic rimfire rifles.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *