7 Common Remington 710 Problems Revealed: Act Now!

The Remington 710 rifle has been a staple for hunters and sportsmen for many years. However, despite its popularity, it has its problems.

It’s common to encounter issues with the Remington 710, particularly its trigger mechanism. 

Another issue that has been reported is with the bolt stop, which can lead to unexpected stops in shooting sessions, a potentially dangerous situation that needs to be addressed. 

We understand how these challenges can be frustrating, especially when looking for a seamless experience with your firearm.

This article explores Remington 710 problems and potential solutions to keep this firearm in working order.

Problems & Solution at a Glance

7 Problems With Their Quick Solution
Failure To FeedInspect, clean, upgrade magazine, consult gunsmith if necessary.
Bolt Stop ProblemsDisassemble, inspect, repair or replace, lubricate, reassemble, test.
Failure To EjectClean, replace worn parts, reassemble carefully.
Trigger ProblemsConsider warranty replacement or upgrade to aftermarket trigger.
Action ProblemsConsider tweaking or replacing parts for improvement.
Poor AccuracyUpgrade factory stock for improved accuracy and stability.
Barrel ProblemConsider contacting Remington for replacement or refund.
Remington 710 Problems

Remington 710 Problems With Their Practical Solution:

1. Failure To Feed:

One recurring issue that frustrates shooters is the failure to feed. This malfunction often stems from a design flaw in the magazine. 

Unlike other models, the Remington 710 features a non-detachable, non-removable, integrated magazine, which poses feeding issues. 

My own experience with this rifle revealed the inefficiency of its magazine system. 

Blindly relying on an integrated magazine can lead to poor quality control, exacerbating feeding issues and compromising the shooting experience.

Solution:

To address the failure to feed, follow these steps:

  • Unload and disassemble the rifle, checking for any damage or debris in the magazine.
  • Clean the magazine thoroughly with a brush and firearm-cleaning solution.
  • Consider replacing the original magazine with a high-quality aftermarket one.
  • Sand down contact surfaces to minimize friction and enhance reliability.
  • Reassemble the rifle and test-fire it with live ammunition.
  • If issues persist, seek qualified gunsmith assistance for further troubleshooting or modifications.

Read More: Resolve 10 Remington 572 Problems with These Proven Tips!

2. Bolt Stop Problems:

Among the primary issues encountered with the Remington 710 is related to the bolt stop mechanism.

 Over time, parts of the firing mechanism in the rifle can wear and tear, causing the bolt stop to become worn out. 

When this component fails, it can no longer prevent the bolt from safely firing, making it unreliable for loading and unloading rounds from the magazine. 

This can make handling the rifle tough, especially in situations requiring quick and precise action.

Solution:

For a solution of Bolt Stop Problems: 

  • Begin by disassembling the rifle, paying close attention to the parts of the firing mechanism. 
  • Organize the pieces and inspect them for any signs of wear or damage.
  • If any damaged components are found, repair or replace them with new parts from a reputable firearms dealer or gunsmith.
  • Clean the surfaces thoroughly and lubricate them with gun oil to ensure smooth operation.
  • Reassemble the rifle according to the manufacturer’smanufacturer’s instructions, ensuring each part is in its proper place. 
  • Test out the newly assembled rifle to ensure it functions correctly. If the problem persists, repeat the process until it is solved.

With this solution, the bolt-stop issue can be resolved quickly, eliminating any delay in the shooting process.

3. Failure To Eject:

Failure to eject (FTE) is a common issue, often stemming from a dirty or worn-out extractor. 

When the extractor fails to grip the spent shell casing properly, it results in the ejecting mechanism pushing the casing back into the chamber instead of expelling it from the gun. 

This can occur if the extractor is clogged with debris or wears out due to frequent use. 

An improperly adjusted bolt lock that is too tight can interfere with the extraction process, preventing the spent casing from being ejected correctly.

Solution:

To address failure to eject (FTE), follow these steps:

  • Strip down the rifle entirely, making all components accessible.
  • Inspect each element for signs of damage, wear, rust, or burring.
  • Replace any worn parts to prevent further FTE occurrences.
  • Thoroughly clean all parts before reassembling.
  • Verify that each component is in its correct position and properly adjusted.
  • Ensure the firing pins and safety selector switch are set tightly to avoid interference.

4. Trigger Problems:

Malfunctions with the trigger mechanism can stem from various mechanical issues.

When the trigger is not firing correctly, it could indicate a broken or bent spring, misaligned pins, or excess dirt and debris blocking the mechanism. 

Foreign objects such as dirt, dust, or small pieces of metal can become lodged within the trigger assembly, impeding its function. 

Additionally, improper lubrication of internal components can lead to dry or oily conditions, which can jam the trigger and prevent it from functioning correctly.

Solution:

Solutions are available for those experiencing issues with the factory trigger, which can significantly improve the shooting experience. 

While some folks may opt to have their triggers swapped out under warranty, others may upgrade to an aftermarket option for better performance. 

Although aftermarket triggers can be pricey, the difference in performance can be night and day, making it a worthwhile investment for enhancing the shooting experience.

5. Action Problems:

Action problems can be frustrating for shooters and often result in difficulty firing rounds smoothly. 

Even with inexpensive ammo like Federal American Eagle 155gr FMJ, you may notice the action feeling sticky or freezing up, leading to a headache on the range. 

When the bolt fails to open correctly, it can ruin an enjoyable shooting experience.

Solution:

When faced with action problems, fixes prefixes are available to improve their performance. Soft rails or gouges in the action can lead to stiff or rough operation, often due to a design flaw. 

To remedy this, consider tweaking or replacing parts with new ones. 

While some may opt for a drastic move like purchasing a new rifle, others may upgrade their existing one, especially if it’s an entry-level or throwaway gun. 

Taking serious steps to address these issues can significantly enhance your shooting experience.

6. Poor Accuracy:

Many Remington 710 owners suffer from poor accuracy, which turns what should be a perfect shot into a disappointing toss to the side. 

These issues often stem from stock problems like shoddy action bedding or a low-quality barrel. The bolt system may also suffer from design flaws, affecting headspace and resulting in erratic shot groups. 

Moreover, a heavy and creep-ridden factory trigger exacerbates these accuracy issues, challenging precision shooting.

Solution:

Are you dealing with the headache of action problems in your Remington 710? Consider a fix that involves upgrading your factory stock. 

Many owners have found that swapping out the stock for a high-quality alternative like Bell & Carlson or Hogue can make a difference. 

These aftermarket stocks are straightforward to install and offer a more rigid construction, reducing flex and torque during shooting. 

As a result, you’ll likely see your shot groups tighten up, and experience improved accuracy, eliminating the factory stock’s poor accuracy woes. You won’t regret upgrading to a better stock.

7. Barrel Problem:

Now, let’s discuss the barrel problems. A barrel that leaves the factory floor without the desired specifications can lead to many problems. 

Often, barrels are hydraulically pressed into the receiver during manufacturing, but if the fit is terrible or partially seated, it can feel like something is wrong with the rifle.

Even something as seemingly insignificant as a screw in the magazine’s front or stock not holding an essential piece in place can cause significant issues.

Solution:

Dealing with a barrel’s poor fit can be frustrating, but fixes are available. 

If it’s a manufacturing issue, the best action might be to return the gun to Remington. They may offer to replace it with a new weapon or provide a refund, though this can be a hassle. 

Alternatively, seeking a more effective solution within the firearm community is also considered. 

While it can be tempting to make do or work around the flaw, ultimately, resolving the issue at the end is the best way to resolve your barrel woes.

My Final Conclusion:

In sum, the Remington 710 certainly has its merits. It offers a starting point for the novice shooter or hunter, with a moderate price and some included features like a synthetic stock and mounted scope. 

However, it has its issues. From trigger woes to bolt mishaps and barrel fits to action stickiness and ejection challenges, some areas need to be prepared for if you’re diving into this firearm. 

That said, there is good news for those willing to get their hands dirty and consider alternatives. 

Many of these problems can be tackled with patience and a willingness to invest in quality aftermarket parts. 

Through field tests and adjustments, the Remington 710 can still become a reliable partner in your shooting endeavors.

My Friends Feedback:

My friend picked up a Remington 710 for a mere 250 bucks. It was chambered in 30-06 and served as a loaner rifle during our hunting trips. He got it from Wal-Mart and decided to put it through its paces.

He found it reasonably reliable after firing about 140 rounds of Federal and other cheap ammunition. He sighted it, and it worked well. At the range, shooting from the prone position, he fired about 100 rounds. 

Dividing it into 20 5-round groups, the rifle consistently delivered under 2 moa accuracy. Despite its bad rap online, it performed well in his hands.

However, he did notice a few issues. The bolt had some slack, making it difficult for him to take a follow-up shot after spotting a nice-sized buck. At times, it bound up against the side walls of the chamber, causing a jam.

Interestingly, he also had a friend with a Remington 770 who faced the same problem. Both rifles were in .30-06. 

Frustrated with the inconsistency, he eventually switched to a Winchester model 70 in .300 magnum, which had no such issues. The bolt binding was a significant reason for his switch.

While some criticize the Remington 710 for its ugly, grey, plastic stock and rough cycling, others praise its accuracy. Despite its flaws, it outperformed other guns in its price range. 

One of his friends, a big-game hunter, swore by it. He had it outfitted with a red dot sight, and it served him well, even outperforming some other rifles like the .270 in accuracy. 

However, another friend had a different experience. He found it worthless and ended up selling it for a fraction of what he paid at Cabelas during deer season, $150.

Overall, the Remington 710 has its pros and cons. While it may not be the most reliable or aesthetically pleasing rifle, it gets the job done at a budget-friendly price point for some.

Remington 710 Problems

Common Questions Asked About Remington 710 Problems:

Is the Remington 710 a good gun?

The Remington 710 is an affordable rifle that comes with a synthetic stock and a pre-mounted scope, making it a suitable choice for beginner shooters or hunters.

What year did the Remington 710 come out?

When Remington launched the Model 710 bolt-action rifle in 2000, the company was unprepared for the torrent of criticism that ensued.

What is the twist rate of a Remington 710?

Twist Rate: 1 turn per 10 inches. Total Length: 42 inches.

How long is the barrel on a Remington Model 710?

22-inch barrel. SN: 71105800. Black Parkerized finish, matte gray synthetic semi-pistol grip stock with black rubber recoil pad. Bolt-action, fed by detachable magazines.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *