4 Common Ruger Security 380 Problems and How to Solve Them

The Ruger Security 380, has been extensively examined and loved by gun experts. It is renowned for its personal protection. However, note that occasional issues may arise with its performance.

Users may face challenges such as firing failures and feeding issues. Despite its reliability, common breakdowns like trigger sticking or recoil spring problems disrupt user experience.

Proactive maintenance and understanding are crucial to overcoming these Ruger Security 380 problems. Addressing issues like trigger sticking and recoil spring malfunction requires careful attention.

With proper maintenance and training, users can ensure the firearm’s reliability and effectiveness in critical situations.

Problems & Solutions at a Glance

4 ProblemsWith Their Quick Solution
Firing FailureConfirm the firearm’s unloaded, clean pin, and check ammo quality.
Feeding IssueClean gun, check feed ramp, test ammo.
Trigger StuckThoroughly clean trigger assembly for safety; consult a professional.
Problem with the Recoil SpringAdjusting or replacing the recoil spring.
Ruger Security 380 Problems

Ruger Security 380 Problems With Their Practical Solutions:

1. Firing Failure:

It can be annoying to experience firing problems with the Ruger Security 380, particularly when expectations of a smooth trigger pull are met with disappointment.

These issues, often stemming from dirty or grimy chambers, bad primers, or firing pin malfunctions, disrupt the shooting experience.

At times, even a small bit of grime can lead to significant letdowns, highlighting the sensitivity of the firearm’s mechanisms.


To fix this issue, ensure the firearm is unloaded and observe safety protocols. Thoroughly inspect and clean the firing pin and chamber, and assess ammo quality to address potential bad primers.

Solving firing failures in the Ruger Security 380 involves straightforward steps. By cleaning critical components and verifying ammunition quality, users can effectively address the issue.

However, it’s crucial to note that occasional problems might arise, particularly with certain models like the Ruger P89. Implementing these measures ensures a reliable and safe shooting experience without any irritating issues.

2. Feeding Issue:

Ah, another frustrating issue is that it can disrupt shooting rhythm and accuracy. Whether due to dirty magazines, bad ammunition, or feed ramp snags, these problems can significantly impact shooting experiences.

When a cartridge fails to feed into the chamber, it compromises swift response times, especially in the field or during precise aiming.


Let’s move on to the solution. First, we will start by unloading and thoroughly cleaning the gun and magazines. Pay attention to the feed ramp to ensure smooth operation.

Consider switching ammunition brands to see if it helps. Regular maintenance and being mindful of ammo choices are crucial. These steps, though complex, are effective in preventing feeding issues in the long term.

3. Trigger Stuck:

Having a stuck trigger with the Ruger Security 380 might disrupt shooting sessions and pose significant problems. During aiming, resistance in the trigger position affects firing precision and can be an annoying experience.


Begin by ensuring safety with an unloaded firearm. Disassemble the trigger assembly and utilize a cleaning kit with solvent to remove any grit or grime that may cause sticking. Using a brush, meticulously scrub the components, then reassemble the trigger assembly.

Perform a dry fire and check if the issue persists. If it does, it’s wise to consult a professional for an expert’s touch. In my experience, tackling a stuck-trigger situation requires patience and precision.

After thorough cleaning and inspection, the problem was resolved effectively.

For more insights into troubleshooting common firearm trigger stuck issues, you might want to read more about Ruger SR40C Problems.

4. Problem with the Recoil Spring:

Encountering issues with the recoil spring in the Ruger Security 380 can disrupt the firing cycle. During cycling, if the recoil spring is inactive or fails to return the slide to its battery, it can lead to malfunctions.

This crucial part of the firearm is often overlooked but plays a significant role in ensuring smooth operation. In my experience, a faulty recoil spring can cause the gun to act up at the range. Rounds may fail to cycle properly, and the overall performance can be compromised.


When your handgun is experiencing annoying issues, particularly while cycling, it’s crucial to consider adjusting the recoil spring. This process may require tools and basic gunsmithing knowledge, but the difference it can make is significant.

Swapping out the recoil spring involves following the manual for disassembly and reassembly of the firearm.

While it may seem daunting, especially for those with limited gunsmithing experience, it can often resolve similar problems faced by others in the Ruger Security 380 community.

Side not, if you encounter these issues with a model like the Ruger P90 problems, it’s advisable to consult a professional gunsmith.

My Final Conclusion:

In my final conclusion regarding the Ruger Security 380 problems, I’ll say this: Yes, you can face many annoying problems, but keep in mind that straightforward solutions are also available.

Addressing issues such as cleaning, spring swap, and maintenance can turn potential deal-breakers into manageable obstacles. With care and reliable upkeep, this firearm can be a concealable, easy-to-handle choice for personal protection.

Investing time in understanding the action required for maintenance and being proactive in overcoming these challenges can make a significant difference.

Switching out parts when necessary ensures the reliability and effectiveness of the Ruger Security 380, making it a worthwhile investment for those prioritizing safety and ease of use.

My Friends Feedback:

Listening to feedback from friends from the gun community who have used the Ruger Security 380 provides valuable insights into its performance and reliability. They’ve highlighted instances of failure to feed rounds, with the chamber occasionally failing to fire.

Some have experienced issues with magazine functionality, requiring them to rack the slide or tap the mag to ensure proper cycling.

Addressing these concerns often involves identifying and fixing underlying issues, such as problems with the recoil spring or interference with slide movement.

Despite these challenges, my friends emphasize the importance of basic maintenance and care, including regular cleaning and inspection, to prevent failures. They also recommend experimenting with different ammo brands to find the most reliable options for range and self-defense use.

My friends’ experiences with the Ruger Security 380 underscore the need for attention to detail and patience in addressing functionality issues.

Despite initial finickiness and cycling problems, they’ve found that with proper break-in and maintenance, the pistol becomes more reliable over time.

Their insights highlight the importance of understanding the mechanics of the firearm and being proactive in troubleshooting to ensure its effectiveness in self-defense scenarios.

Common Questions Asked About Ruger Security 380:

When did Ruger Security 380 come out?

The Ruger Security-9 and Security-9 Compact are both user-friendly, hammer-fired semi-automatic pistols designed for easy shooting and operation. Recently unveiled at SHOT Show 2023, Ruger introduced the Security-380, specifically chambered in .380 ACP. We had the opportunity to test-fire this new model during Industry Day At The Range.

Does the Ruger Security .380 have a safety?

A trigger bar safety, similar to mechanisms found in many contemporary handguns, ensures that the Security-380 will not discharge unless the trigger is engaged. Moreover, a manual frame-mounted safety is positioned on the left side of the firearm for added security.

How many magazines does the Ruger Security 380 come with?

Additionally, it comes with two 15-round alloy steel magazines, a magazine load assist, and a locking device.

How far does a Ruger .380 shoot?

A .380 caliber firearm can maintain consistent effectiveness up to distances of 150 feet (50 yards) or beyond, with effectiveness influenced by factors such as barrel length.

Can you dry fire a Ruger Security 380?

The RUGER® SECURITY-380® pistol can be dry-fired in moderation without harming the firing pin or any other internal components.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *