5 Ruger Security Six Problems: What Every Owner Should Know

When I searched the Ruger Security Six, I expected a smooth experience. But boy, did I encounter some surprises! The journey wasn’t without its hiccups, from common grip problems to a stubborn trigger. These Ruger Security Six problems will become your headache in no time.

However, I’m here to illuminate these issues and offer practical solutions.

Let’s delve into the nitty-gritty and tackle these problems head-on.

Issues and Fixes at a Glance

5 ProblemsTheir Quick Fixes
Parts IssueFocus on fixing the B/C gap.
Grip ProblemSwap to rubber grips.
Trigger Stuck IssueProper cleaning and lubrication.
Barrel Cylinder ProblemAddress the cylinder throats and bore diameter.
Problem with the SightThorough inspection and maintenance.
Ruger Security Six Problems

Ruger Security Six Problems and Their Practical Solutions

1. Parts Issue:

First of all, let’s talk about a major problem with the parts. The shooting experience felt off; it was inconsistent. Owners began to suspect something was wrong with the parts.

It turns out that some models had inferior parts swapped in, a shady practice that’s not just frustrating but can also harm the gun’s performance.

For instance, your trigger got stuck and disrupted your aim during target practice. It’s essential to inspect crucial elements like the B/C gap to ensure they fall within the standard range for optimal performance.

But here’s the kicker: even if you’re using quality parts, the grip can still cause issues.

Owners noticed discomfort and slippage with the hardwood grips on older models. This affects their ability to maintain a steady aim.

Read More: Ruger LCR 22 Mag Problems with Effective Solutions


To tackle this issue, owners focused on fixing the B/C gap and ensured it fell within the optimal range of 0.004 to 0.009.

Also, they paid close attention to the bullets’ ability to pass through the chamber smoothly. They opted for slightly larger semi-wadcutter rounds when necessary.

By addressing these specific areas, they were able to enhance the gun’s accuracy and overall reliability.

2. Grip Problem:

Next, I discovered a significant grip issue with the Ruger Security Six. The hardwood grips on some models were far from comfy. They made the owner’s hands ache and felt incredibly slippery.

This discomfort seriously affected the shooting accuracy, as maintaining a steady aim became increasingly challenging.

Trust me, addressing this grip problem is crucial for enhancing both comfort and performance with the Ruger Security Six.


Let’s talk about a solution. I found that swapping to rubber grips was a game-changer. These grips provided a more secure hold and completely transformed my shooting experience.

For those who prefer a hands-on approach, DIY modifications such as rounding the butt with a grinder can also make a noticeable difference.

Trust me, addressing this grip problem is crucial for enhancing both comfort and performance with the Ruger Security Six.

3. Trigger Stuck Issue:

Let me tell you, dealing with a stuck trigger mid-target practice is beyond frustrating. Picture this: you’re in the zone, aiming for that perfect shot, and bam!

The trigger decides to play hard to get. Talk about throwing off your rhythm. But here’s the kicker: It’s not just an annoyance; it’s a potential safety hazard.

When your firearm isn’t performing as it should, it’s not just your aim that’s compromised. It’s your entire shooting experience.

Trust me, overlooking this problem can lead to some serious consequences.


For, it’s imperative to handle the gun with care and attention. Begin by ensuring it’s unloaded and seek guidance from a certified gunsmith if needed.

A deep clean and proper lubrication of the internals can work wonders in rectifying any obstruction or wear and tear.

By following these steps professionally, you can restore your Ruger Security Six to its optimal condition. You can ensure a smoother and safer shooting experience.

4. Barrel Cylinder Problem:

So, let’s dive into one of the common hiccups with the Ruger Security Six: the Barrel Cylinder Problem. Picture this: you’re out in the field, enjoying your shooting session. Suddenly, something feels slightly off.

Maybe your accuracy isn’t as spot-on as usual, or perhaps you notice your firearm isn’t performing at its peak.

You start digging, trying to pinpoint the problem. Ah, there it is the barrel cylinder alignment seems a bit wonky. The B/C gap isn’t quite where it should be.

Even with a little light shining through, you can see it’s not ideal. And that’s not good news for precise shooting.


Luckily, I knew there had to be a solution. So, owners took it upon themselves to tackle the problem head-on. After some checking and experimentation, they found that addressing the cylinder throats and bore diameter could greatly improve the accuracy and performance.

Criticize the cylinder throats to a larger size and match it with a suitable bore diameter. Yeah, the tight throat issue was resolved.

This simple yet effective upgrade resulted in a major payoff in terms of performance. It’s amazing how a small adjustment can make such a significant difference.

Trust me, if you’re facing similar issues, upgrading the cylinder throats and bore diameter is worth the effort.

5. Problem with the Sight:

So, let me tell you about the Problem with the sight. I noticed something peculiar about the front sight of the Ruger Security Six. It felt a bit wobbly, which affected the owner’s aim.

Here, precision is key, and any minor wiggle in sight can throw off your accuracy. It was frustrating to deal with a loose front sight, especially when in a high-stakes shooting situation.

Maintaining the best possible condition for your equipment is essential. But occasionally wear and tear cannot be prevented, and components like the front sight may break over time and leave you stranded.

Every gun owner should be aware of this because even a minor problem can have serious repercussions.


Fear not; there are ways to address these issues. A thorough inspection and maintenance routine can ensure that parts are in top condition and of adequate quality.

Upgrading to a rubber grip can significantly improve comfort and stability during shooting sessions. For trigger problems, a careful polishing routine or even a sight upgrade can make a world of difference.

The key is to address these issues before reaching the point of no return, where they become irreparable.

Trust me, your Ruger Security Six can perform flawlessly for years to come.

My Final Conclusion:

Okay, let’s conclude. When it comes to the Ruger Security Six, it’s a mixed bag. On one hand, its place in firearms history is undeniable. It’s a versatile defensive weapon with undeniable merits.

However, it’s not without its flaws. The wobbly front sight and inconsistent B/C gaps can affect your shooting experience. Also, there were trigger inconsistencies along with cylinder issues. But here’s the thing: these issues are not the end of the world.

They’re fixable. By upgrading certain components and ensuring regular maintenance, you can turn this firearm into a dependable companion in the field. So, don’t despair if you encounter these hiccups.

With a bit of know-how and some TLC, the Ruger Security Six can still be a force to be reckoned with.

Ruger Security Six Problems

My Friends Feedback:

So, my buddies had a bit of a chat about the Ruger Security Six, and it seems a few issues are popping up here and there.

One common problem we noticed was with the cylinder release button and transfer bar. It’s like a little dance between the trigger, transfer bar, and cylinder release button that sometimes gets out of sync. This caused a bit of a hitch in the operation.

They tried greasing the parts, adjusting the springs, and even tightening the cylinder release screw with loctite, but the problem persisted.

Another annoyance was the hammer occasionally getting stuck, disrupting the smooth hammer stroke. Despite these observations, they haven’t quite found the perfect fix yet.

It’s a shame because the Ruger Security Six is such a reliable revolver otherwise, but these little quirks can really put a damper on things.

Common Questions Asked About Ruger Security Six Problems:

Is the Ruger Security 6 a good gun?

The Security-Six stands out as an excellent option for those seeking a versatile defensive handgun, offering a well-balanced combination of weight and power. Its significance in firearms history is undeniable, as it paved the way for Ruger’s highly successful double-action revolver series.

Why did Ruger stop making Security-Six?

It’s been noted that the Six series revolvers, including the Security-Six, were costly to produce. Bill Ruger himself was quoted as saying he never turned a profit on the Security-Six. This serves as a historical lesson, showcasing Ruger’s efforts to vie with Smith & Wesson for law enforcement agency contracts by offering the Security-Six.

How many Ruger Security Six were made?

The Ruger Security-Six had multiple variants. It was produced in significant numbers. The estimated range is between 1,240,000 to 1,500,000 units. With a 4-inch barrel, it weighed about 33.5 ounces.

Did Ruger discontinue the single six?

The Single-Six is now produced as the New Model Single-Six. “New Model” indicates it features Ruger’s transfer bar mechanism. This mechanism enhances safety, enabling the revolver to be carried with all six chambers loaded securely.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *