6 Ruger Wrangler Problems? Learn How to Solve Them!

I was stoked when I first got my hands on the Ruger Wrangler. An affordable .22 LR revolver that had garnered attention in the firearms field seemed like the perfect addition to my collection.

However, as the initial excitement dimmed, I soon encountered some problems that needed addressing.

These Ruger Wrangler problems include issues with accuracy, jamming, timing, the transfer bar, the hammer, and the cylinder.

This article will explore everyday issues and quick solutions to ensure a reliable and accurate shooting experience.

Problems & Solutions at a Glance

6 ProblemsQuick Solutions
Accuracy ProblemEnsure sights are aligned and calibrated accurately.
Jamming IssueDisassemble, check the center pin and inspect the latch.
Timing IssueContact Ruger or a specialized gunsmith.
Problem with the Transfer BarSeek professional help to ensure firearm safety.
Hammer ProblemConsult a gunsmith or Ruger for Hammer Problems.
Issue with the CylinderConsider switching ammo brands; inspect the firing pin.
Ruger Wrangler Problems

Ruger Wrangler Problems With Their Practical Solution:

1. Accuracy Problem:

Regarding Ruger Wrangler Problems, accuracy is paramount for any shooter.

Picture this: you aim your Wrangler at the target, 25 yards away, only to find your shots consistently off – three high and three left. It’s frustrating, to say the least.

As someone who values precision in shooting, I found this issue close to home.

Many folks, like myself, have experienced this kicker firsthand. The primary culprit? The fixed sights.

A manufacturing glitch has crept into some Ruger Wranglers, causing an alignment mess. But fear not, for there’s light at the end of the barrel.


To resolve accuracy problems, ensure your sights are aligned and calibrated. A reliable gunsmith can help with this.

Consider switching from factory sights to a third-party version for a noticeable difference in your aim. Be careful not to drop the firearm to maintain alignment.

Dry firing can smooth out the trigger mechanism. A reliable gunsmith can also adjust it for better accuracy.

By addressing these concerns, Ruger Wrangler owners can ensure optimal performance.

However, if you encounter Taurus 608 Problems, you must seek professional assistance to resolve any issues seamlessly.

2. Jamming Issue:

The dreaded jamming issue can be a natural mood killer while shooting.

This problem often occurs due to a faulty latch. When the latch is not tightened correctly, it fails to engage fully, leading to jamming. This issue can usually be blamed for misaligned shots and a downward angle of fire.

Another culprit behind the jamming issue can be a misaligned center pin. When the pin is not aligned correctly, it adds to the problem by causing jams at different angles.

This can be particularly frustrating when trying to maintain a consistent shooting angle.


There are effective ways to fix the jamming issue.

  • Start by disassembling your firearm and checking the center pin. Ensure it’s properly seated and moves smoothly. If not, a quick adjustment can often set things right.
  • Next, inspect the latch and make sure it’s fully tightened. If it’s a new unit, contact Ruger directly for assistance.
  • Always exercise extreme caution when disassembling and reassembling firearms. Safety is paramount when addressing the jamming issue.

By following these steps and exercising caution, you can effectively address the jamming issue with your Ruger Wrangler and enjoy uninterrupted shooting sessions.

3. Timing Issue:

A hammer timing issue occurs when the hammer is not cocked properly or moves too slowly or fast, affecting the cylinder alignment and firing process.

This can prevent the gun from working reliably and be far from ideal when you need quick action.

Understanding the hammer mechanism and how it interacts with the cylinder can help resolve this timing issue.


To Fix this issue, contacting Ruger directly is often the best course of action. They are receptive and can explain the situation in detail.

Alternatively, consulting a gunsmith specializing in timing issues can provide nuanced advice tailored to your firearm.

While there may not be a quick fix for timing issues, it is crucial to ensure that safety and reliability remain top priorities.

By seeking guidance from pros and the manufacturer, you can address timing issues effectively and enjoy a smoother shooting experience.

4. Problem with the Transfer Bar:

The transfer bar plays a critical role in the cocking and firing mechanism of the Ruger Wrangler.

However, it can sometimes hang up or tilt, leading to unwanted contact with the firing pin. This can result in misfires and a less-than-ideal shooting experience.

One main offender in this issue is a faulty spring-loaded plunger. This little piece can dig into the transfer bar, causing it to hang up at the bottom of its loop.

This unwanted contact with the firing pin can lead to reliability issues that erode shooter trust in their firearm.


A quick fix for a fully cocked transfer bar may seem appealing, but addressing this complex issue requires careful inspection.

  • Disassembly and careful inspection of the transfer bar mechanism are necessary steps. While this may not be comfortable, it ensures the firearm’s safety and reliability.
  • If you’re not comfortable with this process, it’s advisable to seek assistance from a gunsmith. A professional can provide expert help in addressing severe firearm issues.
  • In some cases, switching ammunition brands or velocities may help mitigate the issue. However, professional help is essential to prioritize firearm safety for a lasting solution.

Remember, safety should always be the top priority when addressing firearm issues.

5. Hammer Problem:

AH, another one of the most frustrating issues is a misbehaving hammer.

This can occur when the hammer is not in the full-cocked position or fails to engage appropriately with the latch. Taurus Tracker 992 Problems can also manifest if the downward barrel position isn’t adequately addressed, contributing to this surprise issue.

Examining the base pin and latch can often reveal the main culprit behind this problem. A misaligned groove or surprise engagement of the latch can cause the hammer to not function as intended.


To deal with the hammer problem on your Ruger Wrangler, you must take a precise approach to ensure firearm reliability.

Disassembling the gun systematically and inspecting the base pin and latch for faulty parts is crucial. If necessary, consider replacing these components to resolve the issue.

Instead of fiddling around, it is advisable to consult a gunsmith or contact Ruger for professional help. These experts can advise you on the best course of action to ensure your firearm functions properly.

Relying on professional expertise has consistently yielded positive results, ensuring your Ruger Wrangler works flawlessly.

6. Issue with the Cylinder:

Discovering a stuck-loaded cylinder can be frustrating and potentially dangerous. This can kill the mood during a shooting session and lead to excessive drag on the firearm’s functionality.

While it may be tempting to blame the cylinder for these issues, the firing pin could also be the culprit.

In my experience, setting up the ammo correctly plays a significant part in avoiding cylinder issues.

Ensuring proper alignment and setup can prevent cylinder jumps and excessive drag, ultimately enhancing the firearm’s reliability.


Moving on to the solution, switching ammo brands can often make a significant difference. Taking the gun apart and inspecting the firing pin can reveal the most straightforward step to resolve the issue.

If the problem persists, consider disassembling the firearm to inspect for worn-out components. Proceed lightly, and seek professional help if needed.

Confidence in addressing cylinder issues comes from understanding the steps involved and knowing when to seek professional assistance.

Read More: 4 Common Taurus Raging Bull 454 Problems and How to Fix Them.

My Final Conclusion:

After putting the Ruger Wrangler through its paces and handling various issues, such as stuck cylinders, transfer bar hang-ups, and timing issues, I’ve come to realize that there’s both good news and bad news.

The bad news is that these problems exist, but the good news is that many have straightforward solutions.

For instance, simply changing the ammo brand can work wonders, while expert help is always just a phone call away for more complicated issues.

The Ruger Wrangler is indeed a mixed bag. It stands out as a reliable and relatively simple firearm in a market filled with options. With the proper knowledge and troubleshooting skills, the Wrangler can be a match for various shooting needs.

My Friends Feedback:

In my circle, the Ruger Wrangler garnered much attention upon being acquired due to its sleek bird’s head grip and the promise of helping to conserve the centerfire ammo supply during practice sessions.

However, what seemed like a perfect addition to our collection soon revealed a minor problem that required attention.

One friend, an experienced gun enthusiast, encountered an issue with the barrel seemingly misaligned when pointed down, causing the hammer to get stuck in the full cock position when pointed up.

Upon inspection, a plunger at the end of the cylinder pin wasn’t making adequate contact with the transfer bar, resulting in the hammer’s weight falling forward and jumping against the lower edge of the firing pin.

After ensuring everything was fully seated, and the cross latch was engaged, he found that pushing the cylinder pin backward while the gun was operated corrected the issue.

Another friend, who acquired the burnt bronze model a few months ago, faced a similar challenge at the range one night. His hammer got cocked but eased and locked up halfway back, making it impossible for the cylinder to rotate.

After some attempts, he pushed it out using a cleaning rod, only to find that the recoil plate spring was broken. Customer service promptly provided him with a new spring and a bushing, and after some maintenance with Liquid Wrench, the gun was back to working as expected.

Another friend, the proud owner of the TALO Wrangler, shared his experience at an indoor range. Despite cleaning it meticulously, he faced problems with Federal HPsHP popping out and Browning HPsHP refusing to go in.

Upon closer examination, it turned out to be a manufacturing GOOF. The breeches and chambers weren’t properly counter-bored, causing the loaded round to fall out of the muzzles.

After consulting a gunsmith, the issue was resolved, providing him with much-needed peace of mind during range sessions.

Ruger Wrangler Problems

Common Questions Asked About Ruger Wrangler Problems:

Is it okay to dry fire Ruger Wrangler?

The WRANGLER® revolver is designed to withstand dry-firing without causing any harm to its firing pin or other vital components. It’s crucial to never carry guns in a cocked position. For safe carrying, ensure the Wrangler™ revolver’s hammer is fully down and the trigger is forward. This positioning prevents the hammer from making contact with the firing pin.

What is the longest barrel on a Ruger Wrangler?

The Ruger Wrangler features a barrel length ranging from 3.75 to 7.5 inches (95 to 191 mm), utilizes the .22 Long Rifle cartridge, operates as a single-action revolver, and is equipped with a 6-round cylinder for ammunition.

Can you shoot 22 shorts in a Ruger Wrangler?

Yes, the Ruger Wrangler is capable of firing 22 short rounds. Unlike other revolvers, the Wrangler doesn’t rely on the gases produced by the round to cock the gun, allowing it to accommodate low-power rounds like the 22 short.

Why is the Ruger Wrangler not available in Minnesota?

Minnesota has a statute banning firearms with frames featuring a low melting point. Consequently, Heritage revolvers and Ruger Wranglers cannot be legally sold by FFLs within the state. However, you can purchase them through private sales. Additionally, if you relocate from a state where these firearms are legal, you’re not obligated to dispose of them.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *