Top 6 Smith and Wesson 460 XVR Problems: Quick Solutions

When I first received the Smith and Wesson 460 XVR, I was excited to test this powerful weapon in the field. However, my initial excitement was soon replaced by disappointment as I began to encounter several issues during my field tests.

It’s crucial to be aware of the Smith and Wesson 460 XVR problems that can potentially impact your shooting experience.

These include accuracy inconsistencies and other performance-related problems. Rest assured, I’m not just here to point out the flaws.

I’m committed to providing you with comprehensive solutions to each issue, aiming to enhance your shooting experience with the Smith and Wesson 460 XVR.

Problems & Solutions at a Glance

6 ProblemsQuick Solutions
Extraction ProblemPrioritize cleaning, lubrication, and use compatible ammo.
Accuracy ProblemRefine ammunition, experiment with bullets, improve sight alignment.
Bullet Case StuckClean cylinder, use proper ammo, inspect irregularities.
Trigger IssueConsult gunsmith to adjust or replace rebound spring.
Flame Cutting IssueSwitch to slower-burning powders, consider hand loading.
Cylinder ProblemConsult gunsmith for efficient, safe cylinder issue resolution.
Smith and Wesson 460 XVR Problems

Smith and Wesson 460 XVR Problems With Their Quick Solutions

1. Extraction Problem:

Extraction issues in the field can be challenging to manage, mainly at critical moments.

The Smith and Wesson 460 XVR revolver, a trusted companion in the field, is not immune to challenges. The crunch of a misfire is the last thing any shooter needs, throwing off rhythm and focus.

Trust me, it’s happened a few times, and each instance was a stark reminder of the importance of reliable extraction with this revered firearm.

Upon investigating, I realized that neglecting proper revolver cleaning can often lead to extraction problems.

The buildup of residue from using the wrong cartridges can also be a real headache, impacting the firearm’s performance.

Solutions:

To deal with extraction problems:

  • Meticulous cleaning and maintenance are paramount.
  • Using a quality cleaning kit and regularly lubricating the gun can make a noticeable difference, guaranteeing smooth operation during hunting trips.
  • Experimenting with different ammo types is also crucial, as certain rounds may fit better and exert less pressure on the revolver, reducing extraction issues.

Shooters can minimize troubles in the field by following these steps and enjoy a more reliable shooting experience.

2. Accuracy Problem:

Now, let’s move on to the second accuracy problem. I’ve often struggled with the need for help with accuracy issues that can frustrate any shooter. If you’ve been in this situation, you’re not alone.

One culprit behind these problems is the formidable recoil generated by this powerful revolver. While the recoil packs a powerful punch, it can reduce your aim and impact accuracy.

Another factor influencing accuracy is the type of bullet used. With the 460 XVR’s heavy velocity, selecting the right bullet is crucial for achieving optimal accuracy.

Solutions:

Addressing accuracy issues involves:

  • Fine-tuning ammunition choices to mitigate recoil effects and enhance accuracy for close and long-range engagements.
  • Experimenting with lighter or heavier bullets to achieve steadier aim and more consistent results.
  • Improving sight alignment through subtle adjustments and investing in quality sights to achieve precise shots.

From personal experience, even minor tweaks to sight settings have proven highly effective in enhancing accuracy at the range.

By understanding the firearm’s needs and implementing simple yet effective changes, shooters can enjoy an improved shooting experience and extend the life of their weapon.

3. Bullet Case Stuck:

Another area for improvement is the bullet case getting stuck. This jam disrupts the reload process and poses a safety concern.

The root cause of this problem is usually simple to identify. An unclean cylinder can lead to friction, causing casings to become jammed during reload.

A tight spot in the cylinder can also prevent casings from ejecting properly, further exacerbating the issue.

When I first encountered this problem, I didn’t realize what was happening. However, upon closer inspection, it became clear that the cylinder was not functioning as it should.

Solutions:

So, what’s the solution? One fix that has made a significant difference is ensuring proper cylinder cleaning after each use. This simple step helps prevent casings from becoming jammed due to residue buildup.

Another important tip is to pay attention to your ammunition type. Mixing ammunition types can lead to problems such as jams and malfunctions.

Additionally, inspecting the cylinder for irregularities or tight spots can help identify and address potential problems before they occur.

Following these tips and taking proactive steps to maintain your revolver can minimize the chances of encountering a bullet case stuck problem in the future.

Rest assured, these solutions have been tried and tested, and they work.

4. Trigger Issue:

This issue often stems from an insufficient rebound spring in the trigger mechanism. The rebound spring is a component that returns the trigger to its original position after being pulled.

If it’s not strong enough, it can cause the trigger to stall, disrupting the pull and making it difficult to achieve the perfect shot.

While this problem may seem annoying, it is fortunately fixable with the right approach. The root of this issue becomes apparent during cleaning and maintenance sessions.

An insufficient rebound spring can trigger stalling, disrupting the pull and making it difficult to achieve the perfect shot.

Building trust in your firearm becomes a minute-by-minute process as you navigate through each pull, hoping for the next one to be ready for that perfect shot.

Solutions:

Resolving trigger issues, especially in the single-action mode, necessitates the expertise of a professional gunsmith. Seeking expertise from a professional gunsmith can make a remarkable difference in resolving these issues.

  • One solution is to contact a professional gunsmith to inspect and shape the rebound spring to ensure optimal trigger performance.
  • In some cases, the rebound spring may need to be replaced to resolve the issue.

It’s essential not to hesitate to check and address trigger problems promptly, as they can affect the firearm’s overall performance. Taking proactive steps to resolve trigger issues ensures that your firearm remains in tip-top condition for every run.

Read More: Alert: Ruger Alaskan 454 Problems You Can’t Ignore.

5. Flame Cutting Issue:

One issue that owners may encounter is flame cutting, a process where high-velocity gases produced during firing erode the cylinder’s metal and other areas over time.

This erosion can cause significant damage to the revolver, affecting its performance and lifespan. While flame cutting may seem odd or surprising, it can have severe consequences if left unchecked.

Regular inspection of your firearm can help identify any signs of wear and tear caused by this issue. You may notice wear in areas affected by flame cutting, which should prompt further inspection and potential repair.

Solutions:

Taking immediate action is crucial to solves the flame-cutting issue.

One solution is to switch to slower-burning powders such as A2400, H110, or W296. This change can help reduce the extreme heat and pressure that contribute to flame cutting.

Additionally, using a hand loader to create custom loads allows for more precise control over powder charge and bullet seating depth. This can provide relief from the serious problem of flame cutting

Don’t wait to tackle flame-cutting head-on.

By taking immediate action and making the necessary changes, you can keep your revolver in good health and prevent damage caused by flame cutting.

6. Cylinder Problem:

For beginners, the Smith and Wesson 460 XVR cylinder can present a challenge in terms of precision and firing flow.

One common issue is the cylinder’s failure to rotate smoothly, which can snag the firing process. In my experience, this problem can be frustrating, especially when time is of the essence during a shoot.

When the cylinder fails to rotate correctly, it can feel like hitting a wall mid-shot. This non-rotating issue ruins the precision of your shot and can also throw off your shooting flow entirely.

I’ve had instances where this problem has occurred at critical moments, causing a significant loss of time and significant frustration.

Let me tell you, it’s not an experience any shooter wants to have.

Solutions:

The solution? Well, consulting an expert gunsmith is the smart move.

A gunsmith is a professional who specializes in the repair, modification, and maintenance of firearms. Their knowledgeable insights and thorough check of your firearm can pinpoint the issue’s root and provide the best solution.

Playing around with your revolver without expert help can be risky. It’s safer and more efficient to consult a knowledgeable gunsmith who can tackle the problem efficiently and safely.

Consulting an expert brings peace of mind and ensures the issue is solved efficiently and safely.

My Final Conclusion:

After thorough testing and field experiences with the Smith and Wesson 460 XVR, it’s evident that while the revolver boasts impressive capabilities, it also presents its fair share of challenges.

From extraction issues to trigger roadblocks, navigating these problems can test patience and expertise.

However, you can keep your revolver in fighting shape with the right solutions and a commitment to keeping your ammo clean and lubricated.

Despite the occasional bumps in the road, the Smith and Wesson 460 XVR remains a formidable choice for those who value power and precision in their firearms.

My Friends Feedback:

When discussing the Smith and Wesson 460 XVR, my friends commented on its strengths and issues. One friend, who uses the 460 XVR for deer hunting, praised its built-in scope and Picatinny rails for mounting accessories like bi-pods.

Thanks to the blowback brake and compensator, he found the recoil quite manageable, though the loud report required him to get used to it and required serious ear protection.

Another friend highlighted his experience with hand loads, using Starline brass and Hornady hollow points. He emphasized the importance of proper reloading techniques, like using the Lee Collet Crimp die and ensuring clean primer pockets for consistent ignition.

He measured the performance center trigger in double action and single action with a Lyman pull gauge and found it smooth. Despite some blowby on the cylinder face and forcing cone, he noted the X frames’ durability and effectiveness in the field.

A buddy who preferred soft-point hunting loads and hard cast loads offered a different perspective. He mentioned the S&W 460’s significant weight and bulk, which could be cumbersome during long hunts.

However, he appreciated its thrill and accuracy, comparing it to a hand rifle in terms of power and range. He also found the Burris and Leupold pistol scopes particularly effective for improving accuracy despite the occasional discomfort from the sustained shove in the palm.

Overall, the feedback was a mix of admiration for the 460 XVR’s power and precision and some caution regarding its heavy build and concussion from the muzzle blast.

But as a hunting companion, it remained a favourite among those who could handle its formidable presence.

Smith and Wesson 460 XVR Problems

Common Questions About Smith and Wesson 460 XVR Problems:

What is the effective range of the S&W 460?

The .460 S&W Magnum is generally effective up to approximately 200 yards, although its design is primarily suited for close-range tasks such as hunting or self-defense within 50 yards.

How powerful is a 460?

With a 460 caliber firearm, a bullet weighing 500 grains (32 grams) is propelled at a recorded velocity of 2,700 feet per second (820 meters per second) from a barrel length of 26 inches (660 millimeters), resulting in a muzzle energy of 8,100 foot-pounds (11,000 joules).

What can a 460 SW shoot?

The revolver is designed to fire the 460 S&W Magnum cartridge, but it can also accommodate .454 Casull, .45 Colt, and .45 Schofield ammunition.

What diameter bullet for 460 S&W?

A .460 S&W revolver is capable of accepting both .454 Casull and .45 Colt ammunition.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *