Solve 6 Remington 7600 Problems With Easy Steps

The Remington 7600 is generally reliable and widely used in the field. It boasts a legacy of performance in hunting, sporting, and law enforcement applications. But, let me tell you, owners always face Remington 7600 problems. These problems range from feeding to firing pins.

In this article, we’ll tackle these problems with a systematic approach. You shouldn’t worry, we will do this together with patience and comfort.

Let’s Go!

Issues and Fixes at a Glance

6 ProblemsTheir Quick Solutions
Feeding IssueConsider investing in a third-party alternative.
Trigger StuckUse a gun-specific lubricant.
Mounting Scope ChallengesProper care and alignment.
Problem with Clip Consider a DIY fix before rushing to a Remington-approved servicing facility.
Action IssueKeen eye for alignment and a knack for adjustment.
Problem with Firing PinRegular cleaning and inspection are crucial.
Remington 7600 Problems

Remington 7600 Problems and Their Practical Solutions

1. Feeding Issue:

Do you know? The feeding issue is a persistent concern that demands attention.

Despite its reputation for reliability, some users encounter difficulties getting this rifle to load properly. This is especially true with the 35 Whelen cartridge. The rounds seem to have a mind of their own.

They often bump or slide instead of smoothly entering the chamber during the bolt’s forward motion. This can be incredibly frustrating. Particularly when you’re relying on the rifle to deliver a reliable shot.

Trust me, it’s disheartening to have such a hard time with a firearm that otherwise performs admirably.

Read More: Remington 7400 Problems with Effective Solutions


Fear not; there are solutions. I’ve found that tinkering with the magazine often resolves the problem.

Sometimes, the stock magazine itself might be the culprit. Consider investing in a third-party alternative, which can dramatically improve feeding reliability.

Additionally, inspect the top of the receiver for any dented areas that may be smacking the bolt as it cycles.

A few smooth fixes involve gently smoothing out these areas. They can help out more than you’d think.

Remember, managing this problem early on is likely to save you headaches down the line.

2. Trigger Stuck:

A stuck trigger! It can be a concerning issue. During field testing, owners found that sometimes the trigger would get lodged. It required a firm squeeze to release it. This particular problem can be frustrating and even dangerous if it occurs unexpectedly.

Also, there’s been occasional popping back after the initial strike. This further underscores the importance of addressing this trigger concern promptly.


The solution? I’ve found that a gun-specific lubricant applied to the trigger mechanism can often be the quick fix needed.

When faced with this problem, ensure the gun is unloaded and the safety is engaged before proceeding.

Applying a lube to the trigger mechanism and giving it a work-through can often loosen up any persisting issues.

However, if the problem persists, consulting a gunsmith might be the next trip.

3. Mounting Scope Challenges:

There are some challenges to consider when mounting a scope on the Remington 7600.

The skin of the rifle is smooth, but it can pose difficulties when trying to secure the scope in place.

Without the right technique, the scope may not sit securely. It affects accuracy and potentially causes frustration during use.


Let’s talk about a solution.

  • First, take extra care during the mounting process.
  • Secondly, ensure proper alignment.
  • Thirdly, utilize quality mounting hardware.

This can help reduce these challenges and ensure a secure fit for the scope.

4. Problem with Clip:

Next, a clipping issue can be a real headache. It can cause abnormal jamming problems.

Picture this: You’re out in the field. You lined up the perfect shot, only to be frustrated by a clip that refused to cooperate.

It’s not just frustrating; it’s a pain. Sometimes, it’s not about the clip itself but rather a design issue that affects its functionality.

I’ve encountered instances where a slight squeak in the clip mechanism can throw off your entire shooting rhythm.

What exacerbates the problem? It is when you try to install a new clip and find that the same issue persists.

Here, the question of reliability occurs. Right?


So, what should you do? The second clip often poses a serious problem for many users. It causes frustration during reloading.

However, consider a DIY fix before rushing to a Remington-approved servicing facility.

Begin by assessing the fit of the new clip. Sometimes, a fine file or grit paper can smooth out any edge that prevents it from fitting properly.

This gentle approach can often resolve the issue without exacerbating it.

However, if the problem persists, it may be time to consult a professional.

Remember, a solid plan and patience can turn you into the hero of your rifle maintenance journey.

5. Action Issue:

Ahh! One problem often stands out: action issues. It’s not one to dismiss lightly.

Picture this: You’re out hunting, and the adrenaline is pumping. Suddenly, the chamber feels off.

It’s like the pump action isn’t as smooth as it should be. You expect that satisfying click, but there’s a sluggish opposition. It’s frustrating, especially when you need those follow-up shots.

The round doesn’t flow as it should. This disrupts the otherwise smooth experience you expect from your firearm.


I’ve found that managing the case pick-up issue often requires a keen eye for alignment and a knack for adjustment.

Sometimes, it’s the smallest parts that make the biggest difference in performance.

Through careful attention to detail, I’ve learned to diagnose and resolve these problems efficiently.

I aim to empower fellow Remington 7600 enthusiasts to overcome any issues they may encounter.

6. Problem with the Firing Pin:

Huff, the dreaded firing pin issue, has surfaced time and again. The trigger becomes unreliable. On closer examination, it’s evident—a faulty firing pin.

This problem stems from an incorrect protrusion length. It causes the primer to be punctured.

This renders the rifle a mere paperweight in the field.


Let’s delve into a practical solution for this persistent concern.

Often, the culprit is a bent or brittle firing pin. It is exacerbated by a bulging pin-securing area.

The hammer spring may also play a role, especially if it succumbs to interference from accumulated grease, oil, or dirt.

Neglecting these steps can mess up the entire firing mechanism. It renders the firearm unreliable.

Therefore, regular cleaning and inspection are crucial.

Additionally, applying a light coating of lubricant can reduce wear and ensure smooth operation.

Remember, addressing these concerns ASAP can prevent further damage and enhance overall performance. Okay?

My Final Conclusion:

Let’s sum up. Diving into the mixed bag of issues with the Remington 7600 has been a journey. Despite its charm and reputation, this rifle isn’t without its problems.

From feeding issues to action complications, I’ve discovered them all.

But therein lies the beauty of this reliable firearm; it’s a canvas for both the beginner and the seasoned pro to test their mettle.

However, the occasional stuck trigger or jammed magazine can turn a promising hunt into a frustrating ordeal.

Nevertheless, many of these issues are not impossible.

Despite its quirks, the Remington 7600 remains a choice for those willing to put in the effort to understand and maintain it.

My Friends Feedback:

My friend’s experience with the Remington 7600 has been both intriguing and challenging. Coming from a family tradition of relying on the reliable 870 shotgun for generations, transitioning to the 760 for deer hunting sparked mixed feelings.

While the older model offered a traditional lever action feel, its heavy side and poor triggers placed it in a different league compared to the good bolt rifles.

However, its ability to shoot faster and its reliable chamberings in 270 and 30-06 made it a viable option for quick moments in the woods.

It became apparent that their experiences echoed my own. One friend shared how the 7600 initially seemed promising but ultimately fell short in performance.

Another recounted an incident where a blown-down trigger group led to a broken finger. It highlighted concerns over the rifle’s receiver design and the soft metal used.

Despite setbacks, there was a feeling of peace on the free-floating barrel.

Yet, persisting issues with jamming and loose pump handles reflect on the rifle’s design flaws.

Common Questions Asked About:

Are Remington 7600 rifles accurate?

Accuracy-wise, these rifles generally performed adequately, with occasional standout performers. A friend of mine who writes about firearms once gathered three .30/06 Model 7600s (the successor to the 760, essentially the same rifle) along with a variety of ammunition and tested their accuracy by shooting groups with each rifle.

How many rounds does a Remington 7600 hold?

The Remington 7600 typically featured an American walnut stock, although the company also offered models with synthetic furniture. Each rifle was equipped with a quick-release box magazine capable of holding four rounds.

What is the difference between a Remington 760 and 7600?

The primary distinctions lie in cosmetic details. The Model 7600 maintained the straight comb buttstock of the Model 760 while introducing fine-line press checkering in a fleur-de-lis pattern. The Model 760 was available in calibers such as.30-’06 Sprg. and.308 Win.

What is the twist rate of a Remington 7600?

The length of pull measures 13.5 inches, and the barrels are crafted from carbon steel. This features a twist rate of 1:10 inches.

What are the rarest Remington rifles?

The rarest variant is chambered in .223 Remington. Only 227 units were produced, most in the final year of production. Before its official inclusion, you could special order a Model 600 in 223 from the custom gun shop.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *