6 Most Common Taurus PT 738 Problems And How To Fix Them

I kept coming across Taurus PT 738 problems on gun forums so I became curious about this gun. So I researched a Taurus PT 738, a compact pistol renowned for its convenience and ease of use.

I needed to ensure the reliability and optimal function of this firearm.

In this blog post, I’ll share my experience and provide valuable tips to address the problems with these guns effectively.

Let’s delve into troubleshooting techniques and strategies to enhance the overall experience with this compact pistol.

6 ProblemsWith Their Quick Solutions
Feeding ProblemClean and maintain magazines, deep clean and oil guns, use quality supplies, and experiment with ammunition types.
Failure to EjectEnsure magazine cleanliness, deep clean and oil gun, use quality supplies, and experiment with ammunition.
Misfires ProblemsReplace faulty ignition coils, ensure a clean fuel system, and consult a mechanic.
Tight Slide PullManipulating magazine springs through repeated slide racking with filled magazine, and practice with dummy rounds or snap caps.
Locked SlideUse Loctite to secure the firing pin retainer pin.
Hammer Won’t Strike Firing Pin
Sent gun to Taurus for repairs, adjustment was ineffective; consulted gunsmith, considered complete hammer replacement.
Taurus PT 738 Problems

Taurus PT 738 Problems with Their Practical Solutions

1. Feeding Problem:

This is a serious problem with Taurus PT 738. This problem often led to jams and difficulty getting rounds into the chamber.

These issues can arise due to various factors, including a dirty firearm with powder residue causing blockages in the barrel.

Additionally, using incompatible ammo that doesn’t meet the firearm’s specifications can also lead to issues with the firing mechanism. Here are some available solutions to resolve feeding problems:

Solution:

Ensure the magazine is in good condition and properly cleaned. Additionally, deeply clean and oil the gun to optimize its working condition. Employ high-quality cleaning supplies that prove effective in resolving issues caused by damaged or worn parts.

Furthermore, experimenting with different types of ammunition helped improve the performance and identify any potential switching factors contributing to the feeding problems.

2. Failure to Eject:

Another issue that I face is FTE. FTE issues can stem from various factors. One of the primary causes is a dirty chamber, where dirt, grime, or residue buildup can prevent spent casings from being ejected correctly.

After frequent use, weak coils may lead to malfunctions, and factors like lead build-up or misalignment within the magazine can also impede the smooth feeding of empty casings into the chamber.

Sometimes, the presence of out-of-spec parts such as extractors, ejectors, or firing pins can affect the firearm’s ability to function correctly. It results in FTE malfunctions.

Solution:

Here, I found some practical solutions for FTE. I confirmed that a clean handgun chamber was vital. The owners removed debris to resolve the problem. Then, they reloaded the recoil spring, especially with a factory-standard one from an approved supplier.

It can be beneficial. It’s essential to check the magazine spring tension regulator and ensure the feed lips of the magazine box and tube body are aligned properly for the smooth loading of rounds into the firearm.

Regular maintenance can prevent the occurrence of worn-out or damaged parts. It should be done immediately when signs of wear are noticed, adhering to OEM standard guidelines.

3. Misfire Problems:

One more frustrating problem is the misfires. It is due to various causes. It includes issues with the ignition system, such as a malfunctioning spark plug or ignition coil.

When the necessary spark to ignite the air/fuel mixture in the cylinders is absent or inadequate, the engine may experience misfires. This could be due to worn-out components unable to produce a spark or incorrectly functioning parts that fail to convert the battery’s energy into high-voltage current sent to the ignition coil.

Consequently, the ignition coil fails to ignite the air/fuel mixture, resulting in a misfire.

Other potential causes related to the fuel system, such as clogged fuel injectors or low fuel pressure from a bad fuel pump or filter, can also prevent the engine from firing correctly.

Solution:

While finding solutions, I considered it crucial to consider multiple causes and methods. It is important to replace any faulty ignition coils and ensure a clean fuel system instead of just replacing the spark plugs as a quick fix.

This comprehensive approach will ensure a proper fix for the problem.

Sometimes, misfires stem from clogged injectors or a failing fuel pump or filter, necessitating their replacement.

However, before attempting any repairs, it’s advisable to consult an experienced mechanic to diagnose the issue accurately and avoid unnecessary expenses or further complications.

While finding these solutions, I also found some Taurus PT22 Problems. You should read them!

4. Tight Slide Pull:

A trigger with a tight pull? Yes, it is frustrating. It affects the overall handling and reliability of the pistol. The difficulty in pulling back the slide can hinder the loading and chambering processes.

It leads to delays and potential malfunctions during shooting sessions, despite efforts to address the issue, such as adjusting recoil springs or mag springs.

The tightness of the slide pull may persist. It requires further troubleshooting or professional assistance to ensure smooth operation.

Also, issues with mag followers can enhance the problem. It contributes to feeding and cycling issues that impact the firearm’s performance.

(Own a Taurus PT1911 too? Then, go ahead and read Taurus PT1911 Problems now!)

Solution:

It is very crucial to address this problem. One effective method is to manipulate the magazine springs by repeatedly racking the slide with a filled magazine.

This action helps to break in the gun and reduce the tension in the slide. It gradually eliminates the issue over time.

Filling and emptying the magazine slots with dummy rounds or snap caps can certainly be a useful practice for simulating real-world scenarios and ensuring the reliable functionality of the firearm.

5. Locked Slide:

During special moments, facing a locked slide in the Taurus PT 738 can be a frustrating experience. The firing pin or its retainer pin may shift from its original location.

It causes the slide to stick out and results in frustrating jams.

These issues can disrupt the shooting process and compromise the firearm’s reliability. It is imperative to address such issues to guarantee smooth operation and eliminate any potential safety hazards on the range or in self-defense situations.

Regular maintenance and thorough inspection of key components can help prevent these issues.

Solution:

I have found solutions for this frustrating problem. One potential solution is to use Loctite to secure the firing pin retainer pin in place at the bottom.

This can prevent interference with the slide and help resolve the problem. This ensures the smooth operation of the firearm and resolves the lock-up issue.

6. Hammer Won’t Strike Firing Pin:

I can understand how frustrating it can be for Taurus PT 738 owners to encounter issues where the hammer fails to strike the firing pin.

Despite pulling the trigger in the full cock position, the hammer sometimes fails to release. It leads to stop cases and a lack of tension.

This malfunction prevents the proper firing of the pistol and can significantly impact the shooting experience.

Solution:

For a solution, the owners sent the gun to Taurus for repairs but received a note stating that the oversized hammer needed to be adjusted. However, this adjustment didn’t address the problem.

Seeking further, they consulted a professional gunsmith who could better handle the task. The solution might involve completely replacing the hammer assembly to ensure proper functioning.

As a responsible firearm researcher, I am loyal to my work. I have an interest in exploring different firearms. So, I also explored Taurus 709 Slim Problems.

My Final Conclusion:

In my final assessment, the H&K VP9SK stands as an intriguing firearm, boasting quality construction and user-centric features.

However, the hands-on experience revealed notable problems, including the slide lock problem and magazine problems. While solutions were provided, these issues could significantly hinder the overall experience.

Yet, with support from HK and available DIY fixes, the VP9SK remains a viable option for those seeking a reliable subcompact firearm.

Ultimately, its suitability hinges on individual priorities and tolerance for potential issues.

My Friends Feedback:


Last week, my friend bought a VP9SK from his local gun store but he quickly noticed a problem: the slide wouldn’t return to its normal position after firing.

Despite cleaning and lubricating it thoroughly, the issue persisted. Even when he tried to load the magazine and perform a press check, the problem remained, leaving me frustrated.

He contacted HK for support, and they responded quickly, agreeing to send him a replacement. However, a disappointing trip to the range with a friend showed the same problem, prompting me to look for solutions online.

But a recent visit to the range changed his mind—the VP9SK was surprisingly smooth and accurate. Despite my initial hesitation, his extensive use and tests with different recoil springs proved the durability of HK pistols.

Although he faced some early issues, the VP9SK has become his go-to home defense handgun.

Common Questions Asked About:

How long is a Taurus 738?

The firearm measures 5.25 inches, with a barrel length of 2.84 inches.

Does Taurus repair guns?

Taurus maintains the right to examine, disassemble, and conduct functional testing on all firearms received at their factory or at any subsequent time. Taurus will furnish a repair estimate to the customer if repairs are necessary and not covered under the applicable Limited Lifetime Warranty.

What caliber is the Taurus pt738?

Its caliber is 380 ACP.

How much is a Taurus pt738?

The TAURUS PT-738 is priced at $299.99.

What country made the Taurus gun?

Taurus Armas S.A., formerly known as Forjas Taurus S.A., is a Brazilian manufacturing conglomerate headquartered in São Leopoldo, Rio Grande do Sul, Brazil.

What are Taurus guns known for?

Nearly 80 years since producing its inaugural landmark revolver, Taurus has emerged as a prominent handgun brand globally. Its diverse range of products caters to professional defense forces, law enforcement agencies, personal defense practitioners, competitive shooters, target shooters, and hunters, solidifying its position as a leading player in the firearms industry.

Does the Taurus PT 738 come with a trigger lock key in the box?

Yes, it comes with a trigger lock key.

I worked hard on this post to help the shooters community. Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *